What was the last year Ford made the 289?
1968
In 1968, the small-block Ford was stroked to 3 in (76.2 mm), giving a total displacement of 4,942 cc (4.9 L; 301.6 cu in). The connecting rods were shortened to allow the use of the same pistons as the 289. It replaced the 289 early in the 1968 model year.
What is the horsepower of a 289 engine?
The 289 (1963-1968) was a high-revving, pint-sized powerhouse producing 195 and 210 horsepower in base trim (two or four barrel carburetor, respectively), and 271 horsepower in HiPo (High Performance) form.
How fast is a 289 V8?
Acceleration Specifications It went from zero to 30 miles per hour in 2.6 seconds and zero to 100 miles per hour in 18.9 seconds. Its standing quarter mile was 15.2 seconds at 91 miles per hour and the top speed was 124 miles per hour.
Are 289 and 302 parts interchangeable?
Bronco Guru A ’68 289 and a ’71 302 are pretty much the same motor, you can mix & match the parts any way you want.
How can I get more horsepower out of my 289?
You can change the intake to a quality dual plane manifold, add headers, increase you cam’s lift and duration, add quality aluminum cylinder heads, increase your compression (beef up the bottom end). You most cost effective way to build a 289 is to not.
Can a 289 be stroked?
Yes, you can.
How much horsepower does a 1968 Ford 289 have?
Engine Basics
| Year | 1968 “C” code | 1968 “K” Code |
|---|---|---|
| Power (hp) | 195 hp @ 4,600 RPM | 271 hp @ 6,000 RPM |
| Torque (lb/ft) | 288 lb/ft @ 4,600 RPM | 312 lb/ft @ 3,400 RPM |
| Compression | 9.3:1 | 10.0:1 (66-67) |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
How much horsepower does a 1967 289 have?
Engine Basics
| Year | 1967 “A” Code | 1967 “K” Code |
|---|---|---|
| Power (hp) | 225 hp @ 4400 RPM | 271 hp @ 6000 RPM |
| Torque (lb/ft) | 305 lb/ft @ 3200 RPM | 312 lb/ft @ 3400 RPM |
| Compression | 10.0:1 | 10.5:1 (65) |
| Displacement | 289 cu / 4.7 liters | 289 cu / 4.7 liters |
Is 289 or 302 engine better?
The 302 differed little from the 289, with the exception of the stroke, which measured 3.0 inches. Aside from the stroke measurements, the 302 also differed from the 289 with a higher nickel content in the engine block to create a stronger engine. The two-barrel version debuting in 1968 generated 210 horsepower.
How do you tell the difference between a 302 and a 289?
The only difference between the 289 and 302 is the 302 has a 1/8″ longer stroke.
What makes a 289 Hipo?
The 289 High Performance V-8 is a warmed-up 289 with a hotter solid-lifter camshaft, cylinder heads designed for high rpm, a dual-point ignition engineered for higher revs, cast-iron exhaust headers, and a wider harmonic balancer to deal with increased reciprocating mass down under.
How big can you stroke 302?
347 cubic inches
Ford Based 302 Small Block, using a 3.400″ stroke to achieve a displacement of 347 cubic inches.