What size is a 39 drill bit?

What size is a 39 drill bit?

Downloadable versions:

Drill size Diameter (in) Diameter (mm)
#39 0.0995 2.5273
#38 0.1015 2.5781
2.6 mm 0.1024 2.6000
#37 0.1040 2.6416

What size is a 40mm drill bit?

2 1/4 in
BOSCH Hinge Boring Drill Bit, 40 mm Drill Bit Size, 2 1/4 in Overall Length, Straight – 3LMY8|T15040 – Grainger.

What size is a 38 drill bit?

Drill Bit Size Chart

Size Decimal Equivalent Decimal Equivalent
.35 mm 0.0138 1.1719
.36 mm 0.0142 1.1811
79 0.0145 1.1875
.38 mm 0.015 1.2008

How many mm is a 3/8 drill bit?

Drill Bit Hole Diameters
Metric Size Fractional Size
15 mm .5906 3/8
16 mm .6299 25/64
17 mm .6693 13/32

What fractional size is a #7 drill bit?

0.2010 inches
A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.

What size is 6mm drill bit?

Metric Tap and Drill Bit Size Table

Tap Metric Drill US Drill
5mm x 0.8 4.3mm
6mm x 1.0 5.2mm
7mm x 1.0 6.1mm 15/64″
8mm x 1.25 6.9mm 17/64″

How big is a #30 drill bit?

Jobber Length Drill Bit Chart

Fractional Sizes Decimal Equivalent (Inches) Flute Length (Inches)
30 0.1285 1-5/8”
31 0.12 1-5/8”
32 0.116 1-5/8”
33 0.113 1-1/2”

What size is a number 44 drill bit?

.086 inch
The #44 drill bit (. 086 inch OD) is the standard bit used for nail axles from Cub Scout kits and other kits. It can be used to drill axle holes, or to create pilot holes in the standard axle slots.

Is 3/8 drill bit the same as 10mm?

3/8″ bits have a nominal size being just ever so slightly under 10mm. You can’t drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.

How do I know what size my drill bit is?

Check the Shank Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.

What can I use instead of a 3/8 drill bit?

If it’s UNF 3/8 24TPI, you need 1/24″ smaller drill, which means a 0.3333″. 21/64″ would be slightly under, 11/32″ slightly over. A letter R drill would probably be “perfect”, a letter Q drill is about a thou under.

What size is a #25 drill bit?

To Tap This Size Screw Or Bolt: Use This Drill Bit: Decimal Inches
10-24 NC #25 .1495
3/16-32 NS #22 .1570
10-32 NF #21 .1590
5mm-0.90mm 4.2mm .1653

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top