What size is a 1/4 BSP thread?

What size is a 1/4 BSP thread?

British Standard Pipe Thread (BSPT)

BSP Thread Size	Outside Diameter mm / inch	TPI
1/4 Inch BSP	13.16 mm / 0.518″	19
3/8 Inch BSP	16.66 mm / 0.656″	19
1/2 Inch BSP	20.99 mm / 0.825″	14
5/8 Inch BSP	22.99 mm / 0.902″	14

What is BSP thread size?

What are BSP thread sizes?

BSP Size	Also Known As	Actual Diameter (Imperial)
3/8″		6/10 inch
1/2″	15 BSP	3/4 inch
5/8″	18 BSP
3/4″	20 BSP	1 inch

What is the meaning of 1/4 BSP?

Use a tape rule (or vernier gauge) to measure across the outside of the male thread. Using the table below we can see that a thread measuring 1/2″ is actually a 1/4″ BSP thread. Similarly, a thread that measures 1″ is actually a 3/4″ BSP thread.

What is a BSP adapter?

Parker K4 (BSP) adapters are typically used as hose adapters on equipment designed and/or manufactured throughout Europe, especially equipment with ties to the UK, Scandinavia, the Netherlands, Spain and Italy.

Is 1 2 BSP the same as 15mm?

Whilst most 15mm compression fittings are 1/2″ bsp, (some earlier ones had finer threads) the same cannot be said for 10mm and 8mm.

Will BSP fit into NPT?

NPT/NPS and BSP threads are not compatible due to the differences in their thread forms, and not just the fact that most sizes have a different pitch. NPT and BSP thread pitches (threads per inch) are listed below.

What is G1 4 thread size?

1/4″

British Pipe Thread ( Whitworth Form) — Parallel (BSPP/BSPF)
Thread Designation	Nominal Size	Major Diameter mm d=D
G1/8	1/8″	9.728
G1/4	1/4″	13.157
G3/8	3/8″	16.662

What is BSP plumbing?

BSP is the abbreviation for British Standard Pipe. The thread, as defined by the ISO 228 standard, uses Whitworth standard threads, and is among a number of technical standards for screw threads that has been adopted internationally for interconnecting and sealing pipes and fittings.

What size is a 1/4 NPT fitting?

NPT and NPTF pipe threads – dimensions according ANSI/ASME B1. 20.1/3.

NPT – American Standard Pipe Thread Taper 1)
Pipe Size (inches)	TPI	Nominal Outside Diameter Pipe OD (inches)
1/8″	27	0.405
1/4″	18	0.540
3/8″	18	0.675

Which is bigger 1/2 inch or 15mm?

1/2″ pipe refers to the internal diameter, 15mm pipe is the external diameter… In my experience they are so similar that you can even use solder fittings without a worry, so using 15mm olives on 12″ pipe isn’t a problem. Occasionally they are very marginally tight, but not enough to be an issue.

Is 3/4 the same as 15mm?

15mm = almost 19/32 inch. 19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch.

What is a 1/4 BSP male plug?

1/4” BSP Male thread connection made of solid brass connection Fitments use a green colour band system which makes it easier for consumers to identify and select compatible plugs and couplers This PowerFit 1/4″ BSP Male Plug is suitable for a 10mm hose.

What size plug do I need for a 10mm hose?

This PowerFit 1/4″ BSP Male Plug is suitable for a 10mm hose. Powerfit air tool fitments use a colour band system making it easier for consumers to identify and select compatible plugs and couplers. Made of solid brass construction, this air tool fitment is designed to suit other BSP style pneumatic air tools fitments.

Which plug shapes are compatible with which sockets and couplings?

Sockets accommodate five common plug shapes: Industrial, ARO, Lincoln, Tru- Flate, and European. With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets. Compatible with Japanese-shape plugs and sockets.

What is the maximum pressure for a power plug?

Use these couplings at pressures up to 5, 000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with International Standard ISO B-shape plugs and sockets. Use these couplings at pressures up to 7, 200 psi.