What is the CP of stainless steel?
468
Specific heat capacity of materials
| Material | J/kg.K | J/kg.°C |
|---|---|---|
| Stainless Steel 316 | 468 | 468 |
| Steam | 2094 | 2094 |
| Sulfur | 706 | 706 |
| Thorium | 118 | 118 |
How hot can 316 stainless steel get?
316/316L has good oxidation resistance in intermittent service up to 1600°F and in continuous service to 1700°F. Continuous use of type 316 in the 850° F to 1550°F temperature range is not recommended due to possibility of carbide precipitation but performs well in temperatures fluctuating above and below this range.
How hot is 304 stainless?
Temperature Tolerances for Grade 304 Stainless Steel In other words, you can expose grade 304 alloy steel to temperatures of up to 1,598 °F for short periods of time without ill effect, and for extended periods of time in temperatures of up to 1,697 °F.
What is the thermal conductivity of AISI 304 stainless steel?
16.2W/m.K
Physical Properties
| Property | Value |
|---|---|
| Melting Point | 1450 °C |
| Thermal Expansion | 17.2 x 10-6 /K |
| Modulus of Elasticity | 193 GPa |
| Thermal Conductivity | 16.2W/m.K |
What is the density of 316 stainless steel?
7.99 g/cm3
Physical Properties (Room Temperature)
| Specific Heat (0-100°C) | 500 | J.kg-1.°K-1 |
|---|---|---|
| Thermal Expansion | 15.9 | μm/μm/°C |
| Modulus Elasticity | 193 | GPa |
| Electrical Resistivity | 7.4 | μohm/cm |
| Density | 7.99 | g/cm3 |
What is the heat capacity of steel?
Heat Capacities for Some Select Substances
| Substance | specific heat capacity Cp,s (J/g °C) | molar heat capacity Cp,m (J/mol °C) |
|---|---|---|
| sodium | 1.228 | 28.23 |
| steel | 0.466 | — |
| titanium | 0.523 | 26.06 |
| water (ice, O°C) | 2.09 | 37.66 |
How strong is 316 stainless steel?
As an austenitic stainless steel alloy, it has qualities such as high strength, corrosion resistance, and high concentrations of chromium and nickel. The alloy has a tensile strength of 579 MPa (84 ksi) and a maximum use temperature of around 800˚C (1,472˚F).
What stainless is best for heat?
409 Stainless Steel has the best heat transfer capability of any stainless steel used in outdoor furnaces, having about 60% more heat transfer capability than 304 SS and a similar heat transfer capability to mild steel when factoring in the thickness of material necessary for mild steel furnaces.
Can stainless steel take heat?
Most austenitic steels, with chromium contents of at least 18%, can be used at temperatures up to 870°C and Grades 309, 310 and 2111HTR (UNS S30815) even higher. An exception to this is the ferritic grade 446 – this has approximately 24% chromium, and can be used to resist scaling at temperatures up to 1100°C.
What is AISI 316 stainless?
The AISI 316 and AISI 316L describes stainless, austenitic chromium-nickel-molybdenum steels which have good resistance in non-oxidizing acids and chlorine-containing media. Due to the chemical composition, the material 316 and the material 316L are inherently corrosion resistant metal alloys.
What is the thermal conductivity of 304 stainless steel?
304 Stainless Physical Properties: Density: 0.803g/cm3 Electrical resistivity: 72 microhm-cm (20C) Specific Heat: 0.50 kJ/kg-K (0-100°C) Thermal conductivity: 16.2 W/m-k (100°C) Modulus of Elasticity (MPa): 193 x 103 in tension Melting Range: 2550-2650°F (1399-1454°C)
What is the tensile strength of 304 stainless steel?
Both 302 and 304 stainless steels offer .29 pounds per cubic-inch density. The tensile strength of 302 and 304 stainless steels are 90,000 pounds per square inch (PSI) and 85,000 psi, respectively.
What is the specific heat capacity of stainless steel?
The specific heat capacity of a stainless steel has been measured in the temperature regions of 1.3 to 30°K and of 60 to 90°K. The results of these measurements show markedly high values of the heat capacity in the lowest temperature region.
What does 304 mean in stainless steel?
304 grade stainless steel is known to be the most widely used and flexible austenitic form of stainless steel. It contains 8% nickel and 18% chromium , making it ultra resistant to corrosion and oxidation.