What is molex4 pin?
The Molex 4-pin power supply connector is one of the standard peripheral power connectors in computers today. This power connector is the standard connector for all PATA based hard drives, many high-end video cards, and some older optical drives and other internal devices.
What is a 4-pin connector called?
The 4-pin Fan power connector is found on motherboards within a computer case. This connector provides power to cooling fans and is typically used on the fan that cools the CPU.
What are the different pin connectors?
Connectors, Interconnects
- Rectangular Connectors.
- Circular Connectors.
- Terminal Blocks.
- Coaxial Connectors (RF)
- D-Sub, D-Shaped Connectors.
- Barrel Audio/Power Connectors.
- Pluggable Connectors.
- USB, DVI, HDMI Connectors.
What is a 4 pin Berg connector?
the four-pin polarized Berg connectors used to connect 3½-inch floppy disk drive units to the power supply unit, usually referred to as simply a “floppy power connector”, but often also referred to as LP4. This connector has a 2.50 mm (0.098 in) pitch (not 2.54 mm).
What is a 4 4 pin 12 V used for?
The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.
What is a p4 connector?
The P4 connector is a 12V power supply cable used with motherboards that have an Intel Pentium 4 or later processor. Today, the connector is a standard power connector and is used with both Intel and AMD motherboards. All of these wires attach to a four pin connection on the motherboard.
How does a 4 pin connector work?
A four pin connector is a little different than the three pin connector since it has the extra (fourth) wire used for controlling and sending signals to the fan, which likely has a chip on it that tells it to slow down or speed up (in addition to the other wires the three pin connector has).
What volt is a 4-prong plug?
120/240-volt
A 4-prong dryer outlet is wired as a 120/240-volt circuit.