What is fax Error Code 344?

What is fax Error Code 344?

The remote machine failed to respond to a fax command from the local machine because the connection was interrupted. These errors can occur if the phone lines in the area to be faxed are old or there is noise (static on the phone line). Other reasons can include power outages and other power-related problems.

What is HP Officejet fax error 388?

A.: According to the HP Support website, 388 error codes are caused when ‘there is too much noise on the line for a valid connection between two fax machines to complete. ‘ HP suggests the following as a potential solution: ‘Retry the fax reception when telephone line conditions have improved.

What is Error 321 on HP fax?

The 321 error is described as such. There was a communication error with the receiving fax machine due to poor telephone line conditions. If the session fails after sending several pages of a large document, resend the document as several smaller documents.

What is Error 351 on an HP Officejet fax?

What causes fax transmission errors?

Make sure the receiving party has a fax machine/software and that it is turned on. Make sure the receiving party has a fax machine/software and that it is turned on. Communication error, usually because the fax hardware is incompatible, often caused by outdated hardware.

What causes a fax to fail?

Faxes can fail for a variety of reasons, such as sending to a non-working or non-fax number, a recipient listing their number on the National Do Not Call List, a recipient line being continually busy or out of paper, or if there is noise or interference on the line.

How do I test my HP fax?

You can send a test fax to the HP Fax Test Service at 1-888-HPFaxme (1-888-473-2963). This free service sends a return fax within 5 to 7 minutes when fax is working properly. Your fax number must match the number you entered in the fax header to receive the return fax.

How do I run a fax test on HP?

HP, the printer and fax machine manufacturer, offers a free hotline at 1-888-HPFaxMe. If you send a fax to this number, have your full phone number in your fax header and don’t have caller ID blocked in your line, HP will respond within five minutes with a confirmation it has received your fax.

How do I troubleshoot a fax problem?

Fax Troubleshooting

  1. Make sure your fax machine is connected to the phone line. There is a phone cord that connects the fax machine to a phone jack in the house and this is how it sends data to other fax machines.
  2. Check for dial tone.
  3. Check for interference.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top