What is Concrex?

What is Concrex?

Concrex® Deep Fill is ideal for filling deep holes quickly and economically! This formula contains less resin than other Watco Concrex products and is reinforced with a granite aggregate. Concrex Deep fill can be used in one layer between 15mm – 100mm.

How do you use Watco Flowpatch?

Watco Flowpatch Deep Fill

  1. For holes between 10-200mm.
  2. Just add water, mix and pour.
  3. Fibre reinforced for added strength.
  4. Forklift traffic in just 2 hours.

What is epoxy mortar?

Epoxy-based mortar is a polymer-based bonding paste used in agglomerate installation in the construction industry. It is used as an adhesive and paste for structural repair. It can also be used to fill gaps, cracks and vents in driveways, patios and plazas.

How do you use Concrex?

  1. Surface preparation. Surfaces to be treated must be clean, dry and free of all loose material. Wire brushing or sweeping is usually sufficient.
  2. Mixing. Each bucket contains Concrex powder and bottles of curing agent.
  3. Application. Apply the repair mortar to the surface to be repaired and smooth with a trowel.

What is the best product for patching concrete?

Our Top Picks

  • Best Overall. Red Devil 0644 Pre-Mixed Concrete Patch.
  • Runner-up. Damtite 04072 Concrete Super Patch Repair.
  • Best Bang for the Buck. Quikrete #862013 5.5 Oz Concrete Repair.
  • Best for Floors. Henry, W.W. Co.
  • Best for Walls. Rust-Oleum 301012 Wall-Surface-Repair.
  • Best Acrylic.
  • Best Vinyl.

What is the best cement crack filler?

Our Top Picks

  • Best Overall. Sikaflex Self-Leveling Sealant.
  • Best Bang for the Buck. Sashco 16210 Slab Concrete Crack Repair Sealant.
  • Best for Foundations. RadonSeal Concrete Foundation Crack Repair Kit.
  • Best for Large Cracks. Red Devil 0644 Pre-Mixed Concrete Patch.
  • Best for Thin Cracks.
  • Best Sealant.
  • Best Cure Time.
  • Best Epoxy.

Is epoxy stronger than mortar?

The Difference Between Epoxy Mortar And Cement Mortar Cement mortar is a mix of fine aggregate (usually sand), a binder (typically lime or cement) and water. Whereas epoxy mortar uses epoxy resin the blend to form a material that has stronger adhesive properties.

What is the difference between epoxy grout cement grout and cement mortar?

Though epoxy grout appears to imply the presence of cement material by its name, it does not contain any cement at all. On the other hand, epoxy hardener serves to initiate the hardening process of epoxy grout. Cement mortar is normally a mixture of cement, water and sand (typical proportion by weight is 1:0.4:3).

How do you use Watco Rejuvenating Oil?

Periodic use of Watco Rejuvenating Oil restores beauty to oil-finished wood by removing surface grime and creating a renewed luster and protection. Rejuvenating Oil replenishes dried out wood and leaves a pleasant lemon scent. It is suitable for use on furniture, trim, paneling or any oil-finished wood surface.

What is concrex® deep fill?

Economical and ultra-strong repair formula for deep holes. Using advanced technology, Watco’s Concrex® Deep Fill can be applied in one layer, reducing downtime and making it the ideal solution for getting rid of deep holes in heavy traffic areas. Rapid and Cold Cure versions available. See Product Details for more information.

What is concrex colours?

Concrex Colours is a coloured epoxy resin mortar for a better blend with a coloured floor than sand and cement or Watco Concrex®. The ideal choice for repairs to floors, steps and ramps for heavy traffic. It can also be used as a coloured screed to provide an attractive, virtually indestructible floor surface.

How long does it take for WATCO tack coat to cure?

For repairs deeper than 50mm, apply in separate layers (allow 6-8 hours between layers for curing) or use Watco Concrex Deep Fill (which can be applied 15-100mm thick in one layer). There is no need to reapply Watco Tack Coat if building up in layers.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top