What does the letter G mean that is in column 1 of the HazMat table?

What does the letter G mean that is in column 1 of the HazMat table?

proper shipping names
Symbol Meaning G Identifies proper shipping names for which one or more technical names must be entered in parentheses, in association with the basic description. I Identifies proper shipping names which are appropriate for international transportation.

What is the 49 CFR HazMat table used for?

The Hazardous Materials Table usually referred to as the HMT or the Table, governs the transportation of hazardous materials by all modes air, water, rail and highway.

What is the DOT hazard class for toxic substances?

Hazard Class 6
Hazard Class 6 – Toxic & Infectious Substances Toxic or poisonous material (6.1) can be solids or liquids known or presumed to be toxic to humans.

What is the difference between UN and Na identification letters in column 4 of the hazmat table?

United Nations (UN) Numbers are four-digit numbers used to identify hazardous chemicals or classes of hazardous materials worldwide. North American (NA) Numbers are identical to UN numbers. If a material does not have a UN number, it may be assigned an NA number.

What does packing Group 1 indicate?

Packing group I: substances presenting high danger; Packing group II: substances presenting medium danger; and. Packing group III: substances presenting low danger.

What do the letters in hazmat stand for?

hazardous materials
HAZMAT is an abbreviation for “hazardous materials.” HAZMAT is an abbreviation for “hazardous materials”—substances in quantities or forms that may pose a reasonable risk to health, property, or the environment.

What are the columns included in the hazardous materials Table?

Columns 2, 3, 4, and 5 provide information used for the basic description of a hazardous material. Column 4 lists the identification number. Column 3 lists the hazard class or division. Column 2 lists the proper shipping name.

Is aerosols poison a proper shipping name?

One important thing to remember is that Aerosol or Receptacle proper shipping names can never be used when shipping Division 2.3 Poison Gas. Division 2.3 Poison Gases are required to be shipped in DOT or UN Specification containers.

What is a Class 3 hazardous material?

Class 3 dangerous goods are flammable liquids with flash points no more than 60 celcius degrees. It covers liquid substances, molten solid substances with a flash point above 60 celcius degrees and liquid desensitized explosives.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top