What does the B stand for in B-24?
Answer: The B in B-17 and B-24 stand for Bomber and the P in P-38 stands for Pursuit.
What was wrong with the B-24?
The B-24 bomber one of the most difficult planes to fly during WWII. It was unpressurized, underpowered and prone to explode on takeoff. Unlike the B-17, the B-24 could not maintain altitude if one engine was lost. If two engines were lost, the plane would drop pretty much like a rock.
How big is a B-24?
Other Operators and Models:
|Consolidated B-24 Liberator||XB-24||B-24G|
|Wing span:||110 ft 0 in (33.53 m)||110 ft 0 in (33.53 m)|
|Length:||63 ft 9 in (19.43 m)||67 ft 2 in (20.47 m)|
|Height:||18 ft 8 in (5.68 m)||18 ft 0 in (5.49 m)|
Which is better B-17 vs B-24?
The B-24 was a faster plane having a greater range and payload capacity. However, in the ETO, the B-24 operated with the B-17 which constrained the aircraft’s operating speed. The B17 was a sedate aircraft and placed fewer demands on the flight deck crew. The B-17 was also an easier aircraft to fly in formation.
Was the B-24 better than the B 17?
The B24 had a larger bombload and a better range. However the B17 was tougher and could fly higher. The cynic says if you’re crew the B17 is the better plane as you have a better chance surviving in one. If you’re planning the war the B24 is a better plane as it can drop more bombs further into Europe.
How far could a B-24 fly?
In time the B-24 would boast a long, tapered wing atop its fuselage, which allowed impressive long-range cruising capabilities. A B-24 could reach 290 miles per hour and carry a 5,000-pound bomb load for 1,700 miles, giving it a longer range, greater speed, and a bigger payload than its B-17 cousin.
Did the B-24 replace the B17?
The B-24 Liberator in the Pacific Theater. Beginning in the spring of 1943, the 43rd Bomb Group replaced its B-17s with B-24s, ending the combat career of the Flying Fortress in the Pacific.
Is a B-24 bigger than a B-17?
The B-24 had a shoulder-mounted high aspect ratio Davis wing. This wing was highly efficient allowing a relatively high airspeed and long range. Compared to the B-17 it had a 6-foot larger wingspan, but a lower wing area. This gave the B-24 a 35% higher wing loading.
What is the use of dimensional analysis?
Dimensional Analysis Dimensional Analysis (also called Factor-Label Method or the Unit Factor Method) is a problem-solving method that uses the fact that any number or expression can be multiplied by one without changing its value. It is a useful technique.
What are the characteristics of a non-dimensional equation?
: Removal of units from physical quantities by a suitable substitution of variables • Nondimensionalized equation : Each term in an equation is dimensionless E.g.) Displacement of a falling body
What is homogeneity in dimensional analysis?
Homogeneity Principle of Dimensional Analysis Principle of Homogeneity states that dimensions of each of the terms of a dimensional equation on both sides should be the same. This principle is helpful because it helps us convert the units from one form to another. To better understand the principle, let us consider the following example:
What is 3D nondimensionalization?
3 Nondimensionalization Nondimensionalization : Removal of units from physical quantities by a suitable substitution of variables • Nondimensionalized equation : Each term in an equation is dimensionless E.g.) Displacement of a falling body