What did a 904 transmission come in?
The Torqueflite 904/999 series of transmissions were used in Jeep CJ, MJ and XJ models. The full size Jeeps used the more robust 727 Torqueflite transmissions. The Jeep 904 transmission was 1st used by Jeep behind the 4 cylinder CJ starting in 1980.
Are all 904 transmissions the same?
Both the 727 and 904 versions of the TorqueFlite are similar in design, although none of the components are interchangeable between the two with the exception of the valve body, though calibration is different.
What is the difference between a 727 and 904 transmission?
The 727 was the only available automatic transmission for big block cars. You could get a 727 for a small block, which where mostly for 340’s and 360’s or you could get a 904 which was primarily for the 318. 727 is a much heavier duty transmission and can really take a beating.
How long is a 904 transmission?
A-904 (32RH)
| Style | A | C |
|---|---|---|
| Small Block | 30 3/4 in. | 24 5/16 in. |
What does 42RE mean?
What does 42RE mean? The 42RH was a medium-duty transmission, while the 42RE was a heavy-duty version of the same transmission. They featured identical gear ratios, but the 42RE used electronic components to shift gears. The 42RH used a mechanical hydraulic system.
What does 46RE mean?
The A518, later renamed 46RH (hydraulic controlled governor pressure) and 46RE (electronic controlled governor pressure), is an A727 derivative with overdrive, in the A500 ilk. Starting in 1990, it was used in some trucks and vans. The overdrive fourth gear ratio is 0.69:1.
What is a 518 transmission?
The A-518 is also known as a 46RH transmission and was used extensively by Chrysler in the early to mid- ’90s as a replacement for the A-727. It is the heavier-duty cousin of the A-500 overdrive, typically used behind V-6 engines in the mid-’90s.
Are 727 transmissions any good?
The 727 is highly adaptable and strong enough to handle 450hp engines. This makes the A-727 a good candidate for installing into your Chrysler, GM or AMC car or truck. The Torque Command “8” was released in 1956 for use in the full-size Chrysler cars. The rest of the Mopar fleet began using this transmission in 1957.
What is the difference between 42RE and 42RLE?
did the 42 RE also fit wranglers? 42RLE: Four-speed automatic transmission was available from 2003 to 2006 Jeep TJ Wrangler with 4.0L engines. 42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.