## How many amps does a 75 kW motor draw?

Three Phase Motors

MOTOR RATING | HP | APPROX. F.L.C. AT LINE VOLTAGE |
---|---|---|

37 kW | 50 | 130 |

45 kW | 60 | 147 |

55 kW | 75 | 183 |

75 kW | 100 | 239 |

## How do you calculate current from HP?

How to Convert Horsepower to Amps

- Amps = (Horsepower × 746) ÷ Efficiency ÷ Volts.
- Watts = Horsepower × 746.
- Watts = Wattsη
- Amps = Watts ÷ Volts.
- Amps = HP × 746V × η × PF.

**How many amps does a 22kW motor draw?**

42A

Fixed mains supply output is 22kW (30HP) x 1465RPM at 400V x 50Hz 3ph. Full Load Current – 42A at 400V. Overload – 150% x 60seconds. Power Factor is 0.83 when mains connected at 50Hz.

### How much current does a 1 hp motor draw?

AMP DRAW BASED ON HORSEPOWER

HP | 1 Phase Amps | 3 Phase Amps |
---|---|---|

115 volt | 230 volt | |

1/2 | 9.8 | 2.2 |

3/4 | 13.8 | 3.2 |

1 | 16 | 4.2 |

### What is the difference between full load current and rated current?

Full load rated current is the max current through a device of which instrument can withstand without any breakdown(insulation etc).. Rated current is the current at any given conditions but full load current is the maximum current that the system design can have it w’ll b larger than that of the rated current.

**What is the highest HP for a single-phase motors?**

Large Single-Phase Motors The largest single-phase motors suitable for residential use top out at 10 horsepower. A few commercial applications may be found for higher voltage single-phase motors at up to 15 horsepower, but these are rare and require 480 volts of single-phase current to operate.

#### How many amps are in a kW?

4.55 Amps

kW To Amps Calculator

Power (kW) | Voltage (220 V) | Amperage (A) |
---|---|---|

1 kW to Amps: | 220 V | 4.55 Amps |

2 kW to Amps: | 220 V | 9.09 Amps |

4 kW to Amps: | 220 V | 18.18 Amps |

6 kW to Amps: | 220 V | 27.27 Amps |

#### How many HP is a 3 amp motor?

Common Amps to Horsepower Conversions

Amps | Horsepower | Voltage |
---|---|---|

3 A | .43 HP | 120 V |

4 A | .58 HP | 120 V |

5 A | .72 HP | 120 V |

6 A | .87 HP | 120 V |

**How many amps is a 11kW motor?**

An 11kW 3-phase induction motor operating on 380V should have a full-load current rating of approximately 21A. Assuming it’s a high-efficiency design, it will draw approximately seven times its full load current at start, or 147A, so yes, 148A is a perfectly reasonable value to expect.

## How many HP is 15 amps?

Common Amps to Horsepower Conversions

Amps | Horsepower | Efficiency |
---|---|---|

10 A | 1.45 HP | 90% |

15 A | 2.17 HP | 90% |

20 A | 2.9 HP | 90% |

25 A | 3.62 HP | 90% |

## What is motor the current?

The “motor current” is the amplitude of the motor phase currents while the “phase current” represents the current measured on each of the motor phases. The picture below shows the motor current and the phase currents in case of a brushless motor, driven in sinusoidal mode.

**What is motor rated current?**

The current drawn by a motor at its full load, calculated using formula is known as the rated current. Motor windings are designed to carry the rated current during normal operations and slightly higher than it for shorter duration.

### How much HP is 75kW?

75 kW to HP. In order to convert 75 kW to HP, you only need to multiply 75 kilowatts to 1.36. Hence, 75 kW in HP is equal to 102 bhp. Vehicles with this caliber usually use an engine size of nearly 1600 cc fitted with 16 valves.

### How much horsepower is in a kilowatt?

Kilowatts to metric horsepower. One metric horsepower is equal to 0.73549875 kilowatts: 1 hp(M) = 735.49875 W = 0.73549875 kW. So the power conversion of kilowatts to horsepower is given by:

**What is the horsepower of a 240 volt motor?**

MOTOR RATING HP APPROX. F.L.C. AT LINE VOLTAGE 110V AC 220V AC 240V AC 0.07 kW 1/12 2.4 1.2 1.1 0.1 kW 1/8 3.3

#### What is the horsepower of a single phase motor?

Single Phase Motors MOTOR RATING HP APPROX. F.L.C. AT LINE VOLTAGE 110V AC 220V AC 240V AC 0.07 kW 1/12 2.4 1.2 1.1