How do you reset a Hotpoint washer?

How do you reset a Hotpoint washer?

Motor Reset Procedure:

  1. Unplug the washer for 1 minute from the electrical outlet.
  2. Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid.
  3. The motor has now been reset and is ready for you to start a cycle.

Why are all the lights on my Hotpoint washing machine flashing?

End light flashing Indicates that the Hotpoint washing machine has reached the end of a wash programme. If the wash, rinse and spin function lights all flash at the same time, this would indicate a possible blockage in your filter or waste / drain pipe.

Why is my Hotpoint washer not draining or spinning?

Common solutions for: Hotpoint Washer won’t drain. Sometimes, small objects or articles of clothing can get caught in the drain pump. To determine if anything is blocking the drain pump, remove the drain pump and check the pump for obstructions. If the door lock is defective, the washer will not spin or start.

Why is my Hotpoint washer not starting?

Common solutions for: Hotpoint Washer won’t start. The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity.

Why are the lights on my washing machine flashing?

Flashing Lights if the wash, rinse, and spin function lights are all flashing at the same time this indicates a potential obstruction in the drain or waste pipe. Worn carbon brushes can also cause this to happen.

Why is my washing machine blinking?

A blinking sensing light indicates an underlying issue with the drain, spin, or any other function. There are several such problems that Whirlpool washers commonly run into. The washer will function only when the lid/door is completely closed and locked. The water pump belt in the washer has worn out or is damaged.

What does it mean when a washer won’t drain?

There are a few possibilities why your washing machine won’t drain. Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed.

Why is my washing machine not turning on?

Make sure the machine is tightly plugged in. Next, check for a tripped circuit breaker. Reset the breaker and try to start the washer. If neither is at fault, you may have a damaged power cord.

Why is my Hotpoint dryer not heating?

Another possible cause for a dryer not heating up could be attributed to a faulty thermal fuse. Once a dryer’s thermal fuse has blown, it is no longer of any use. If your dryer’s fuse is blown, you will have to replace it. Open up your dryer’s cabinet and locate its thermal fuse so that you can test it.

How do you remove the agitator on a Hotpoint washing machine?

Remove the socket wrench from the extension and socket. Insert the extension into the agitator and line up the socket with the bolt hole. Tap the top of the extension with a mallet to loosen the agitator coupling inside the agitator.

What does Hotpoint appliances mean?

Hotpoint is a brand of domestic appliances. Ownership of the brand is split between American company Whirlpool, which has the rights in Europe, and Chinese company Haier, which has the rights in the Americas through its purchase of GE Appliances in 2016. The company name Hotpoint comes from the hot point of the innovative first electric iron.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top