How do I turn on my Duraflame electric fireplace?
By pressing the Power button again the unit will turn on at the same settings. With the power on press and hold the Power button on the control panel for 10 seconds to dis- able or re-enable the heater function. Once disable or re-enabled the emberbed lights will flash multiple times.
How do I reset my Duraflame electric fireplace?
To do so, turn off and disconnect the unit from the wall socket. Then, press and hold down the main power button on the unit itself. Continue to hold down the button while plugging unit back in, and once it is plugged back in, continue to hold the button down for 5 seconds and then release.
What does E3 mean on a Duraflame heater?
Display shows “E3” Manual Reset overheat protection has triggered. Inspect the heater and check that the air inlets and outlets are not blocked as this may cause overheating. Unplug the heater for 5 minutes and allow it to cool down.
What do the buttons on my electric fireplace mean?
The power button supplies power to all of the functions of the fireplace. The power button will put the insert (I) in a standby mode. This will turn off all functions at once but will hold the settings in the memory. By pressing the power button again the unit will turn on at the same settings.
Why is my Duraflame heater not working?
To manually reset: Turn Power to Off and unplug the unit from the wall outlet for 5 minutes. After 5 minutes, plug the unit back into wall outlet, and operate as normal. If this doesnt work do the Master Reset, which is : turn off and unplug unit, Hold down main power button on the unit itself.
Is there a reset button on a Duraflame heater?
Why does my Duraflame heater turn off?
Here are likely reasons your Duraflame heater won’t run properly: Broken heating element. Malfunctioning shut-off sensors.
Why does my electric heater keep turning on and off?
So, if your furnace keeps turning off and on too quickly, your thermostat might be malfunctioning or broken. There are several things that could be causing your thermostat to not work properly. The wiring could be old and need replacing, it might need new batteries, or it could be the location of your thermostat.
What does E1 mean on electric fireplace?
Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.
How do you manually turn on an electric fireplace?
To get the flames to work on an electric fireplace, simply turn on the flame effect switch.