How do I restore my Brother printer to factory settings?

How do I restore my Brother printer to factory settings?

Press the Up arrow key select Reset.

1. Press the Settings button.
2. Press All Settings.
3. Press Initial Setup.
4. Press Reset.
5. Press All Settings or Factory Reset (depends on which model you have).
6. Press Yes.
7. Press Yes again and hold for two seconds.

How do I Factory Reset my Brother MFC l2740dw?

Reset the Network Settings to the Factory Settings

1. Press. (Settings) > All Settings > Network > Network Reset.
2. Reset Network? will be displayed. Press Yes.
3. Reboot OK? will be displayed. Press Yes for two seconds to confirm. The machine will restart.

What does machine reset do on Brother printer?

Use the Machine Reset function to reset the machine’s settings to the factory settings. The network settings and the security settings will not be reset by the Machine Reset function.

Does Brother printer have a reset button?

Go to the “Settings” option and press “All Settings”. After that, go to the “Initial Setup” section and press the “Reset” button. Press the Up and Down keys to display the type of reset function, and then press the reset function key that you want to use. LCD Display [After reset the printer will reboot.

How do I reset my Brother MFC J497DW?

MFC-J491DW/MFC-J497DW

1. Press Settings.
2. Press or to select the following: Select [Initial Setup]. Press OK. Select [Reset]. Press OK. Select the reset option you want to use. Press OK.
3. Press for two seconds to confirm. The machine restarts.

How do I reset my Brother HL L2300D printer?

Brother HL-L2300D Toner Reset

1. Press and Hold the Power button until the machine turns off.
2. Open the Toner Door.
3. Press and Hold the Go button until step 5.
4. Press the Power button.
5. Release the Go button when the Toner, Paper, and Drum lights are lit.
6. Press the Go button 9 times.

How do I Factory Reset my Brother MFC J497DW?

How do I clear the memory on my Brother MFC printer?

Press the blue key labeled BLACK START or the green key labeled COLOR START on the Brother machine to send or copy the pages you have scanned so far. Press the STOP/EXIT key to cancel the job. a. If the ‘Out of Memory’ message continues to appear, you should clear some jobs from your Brother machine’s memory.

What is Brother printer default password?

The default password for most of the models of brother printer is “access”. 7. You can also use Web-Based Management or BR Admin Light to change this password.

How do I reset my Brother printer when it wont turn on?

3.1 Method 1

1. Remove the power cord for at least 30 seconds.
2. Press and hold the ON/OFF button down, and then insert the power cord back into the Brother machine.
3. Do not release the ON/OFF button until the machine has been powered on completely or after 15 seconds.
4. Repeat this procedure up to three times if necessary.

How do I reset my Brother mfc 7360N?

BROTHER MFC-7360N/MFC-7362N Open the machines front door where you would replace the cartridges. On the top panel you will see a “clear/back” button. Press it and on the display you will see a reset menu come up. Arrow to desired item (toner, drum etc) and press the OK button.