How do I access my D-Link DNS-320L?

How do I access my D-Link DNS-320L?

How to Access the Web Interface of the DNS-320 Remotely using D-Link Router

1. Put a check mark on the row to enable the rule.
2. Enter a name for the policy you would like to create.
3. Enter the IP Address of the DNS-320 (On Step 2)
4. Enter Port 80 both on Public and Private port.

What is D-Link DNS-320?

Product Description. D-Link’s DNS-320 ShareCenter 2-Bay Network Storage device is the cost-effective way to store and share documents, music, videos, and photos with anyone on your network. The DNS-320 allows you to insert your own disk drives and can support up to 4TB of storage capacity.

How do I reset my DNS-320L?

To factory reset the DNS-320L locate the small hole on the bottom of the machine marked “reset”. After the DNS-320L has been powered on for at least one minute insert an unfolded paper clip or tiny screw driver in the hole. Push gently until you feel a click and then hold for 10 seconds. Then release the button.

What is D-Link Share Center?

ShareCenter® 2-Bay Network Storage Enclosure, (2) 3.5″ Bays, SATA, RAID 0/1, Gigabit Ethernet Port, USB Print Server. Plus, it features a built-in Web File and FTP server so you can remotely access your files over the Internet.

What is Dlink Share Center?

Amazon.ca Product Description. D-Link Share Center 2-Bay Cloud Storage 2000 (DNS-320L) is the perfect home solution to share, stream, manage and back up all of your digital files by creating your own personal Cloud.

How do I reset my Zyxel NAS?

Press the RESET button until you hear one beep (after about two seconds), then release it. You will hear one more beep after you release the button. This resets the NAS’s IP address and password to the default values. for around five more seconds, then release it.

How do I access my D-Link DNS-323 over the Internet?

The simplest way to access your DNS-323 is to use theEasy Search Utility provided on the CD-ROM. Thiswill automatically detect any DNS-323 devices on your network,allow you to set up network drives in Windows, perform basicconfiguration and access the web configuration interface.

How do I connect to DNS-323?

Your setup may look slightly different.

1. Configure the DNS-323 for access from your network.
2. Go to Setup > Device.
3. Browse into the DNS-323 using Windows Explorer and create the directory structure you wish to use.
4. Log into the DNS-323 configuration pages and go to Advanced > Users.
5. Go to Advanced > Network Access.

How do I connect to Dlink Share Center?

Step 2: Go to the mydlink support page and download the setup wizard specific to your model and operating system. Unzip it to your desktop or a folder on your PC. Step 3: Open a web browser and enter the IP address of your ShareCenter to access the Web UI.