How do I reset my Polar s725?
Press and hold the big bottom middle (OK) button for a few seconds. This should cause “Default SET” to flash, keep holding the button until the display resets to that shown in step 2. Release the button.
How do I change the battery in my Polar Bluetooth Smart?
Battery Replacement
- Using a coin, open the battery cover by turning it counterclockwise to OPEN (see image at right).
- Insert the battery (CR2025) inside the cover with the positive (+) side against the cover. Make sure the sealing ring is in the groove to ensure water resistance.
- Press the cover back into the connector.
What battery does a Polar ft1 use?
Training Computer
| Battery type | CR 2025 |
|---|---|
| Battery life | Average 2 years (1 h/day, 7 days/week exercise) |
| Operating temperature | -10 °C to +50 °C / 14 °F to 122 °F |
| Wrist strap material | Thermoplastic Polyurethane |
How do I clear the memory on my polar M400?
You can do a soft reset by pressing and holding the UP, DOWN, BACK and LIGHT buttons simultaneously for five seconds until the Polar animation is shown on the display. After the reset, the M460/M400/V800 automatically goes to time view. All data that you have synced from your Polar device to your Flow account is safe.
Do Polar heart rate monitors have batteries?
The Polar H10/H9/H7 heart rate sensor has a user changeable battery. Average battery lifetime of a heart rate sensor can be found in the product user manual. You can change the sensor battery yourself.
How long does a Polar chest strap last?
Product Comparison:
| Function/Feature | Polar H9 | Polar H10 |
|---|---|---|
| Typical Placement | Chest Strap | Chest Strap |
| Battery Life | 1 year | 1-2 years |
| Battery Type | Coin Cell CR2025 | Coin Cell CR2025 |
| NFC Capable | No | No |
Can you replace the battery in a Polar heart rate monitor?
How do I reset my Polar V800?
To factory reset
- Plug in V800 to your computer’s USB port and go to FlowSync software.
- Click (Settings) and FACTORY RESET.
- Once Flow web service landing page opens, select Sign in and use your existing credentials to log in.
- Accept the settings and press Done in the end.
What do the symbols in the Polar S625x user manual mean?
Polar S625X, Polar S725X user manual See the glossary for display text interpretation. USER MANUAL ENG Display symbols RUNNING COMPUTER S625X CYCLING COMPUTER S725X 17927681.00 ENG B Indicates an ongoing heart rate measurement and flashes to the beat of your heart. Indicates there has not been heart rate reception for at least 5 seconds.
What do I need to know about the S625x?
Polar S625X offers you the possibility for infrared communication with Polar training analysis software. See the instructions from the CD-ROM set. S625X S625X With the following accessories you get the most out of your S625XDisplay symbols See the glossary for display text interpretation.
What is the maximum riding direction for polar s725x/s625x?
60° Riding direction 2 If you are using Polar S725X/S625X with Polar Power Output Sensor, please see the bike mount and sensor installation instructions in the Power Output Sensor user manual. If you use the Power Sensor, you do not need to mount any other sensors on your bicycle. max 50 cm / 1´8´´ 1
What is the accuracy of the Polar S625x laser?
Polar S625X is a Class 1 Laser Product. Accuracy of heart rate measurement: ±1% or ±1 bpm, whichever larger, definition applies to steady state conditions. Altitude and temperature measurement: The Polar S625X calculates altitude by using the standard average altitude in certain air pressures according to the ISO 2533.