Why is my Western plow not working?
An easy fix and possible cause of the problem is that either the incorrect hydraulic fluid is being used, or the fluid level is too low. The hydraulic pump may also be clogged; the pump filter will have to be replaced, and he hydraulic system will have to be flushed and refilled before the plow will function properly.
What are the parts of a snow plow called?
The Ultimate Glossary of Snow Plow Parts Terminology
- 11 Pin Plug or 13 Pin Plug.
- Angle Cylinders.
- A-Frame.
- RT3 Attachment System (SmartHitch1)
- RT3 Attachment System (SmartHitch2)
- Blade Crate.
- Base Angle.
- Blade Guides.
Where is the serial number on a Western snow plow?
We have enclosed a “Report Card” in your Owner’s Manual packet for your use. Your WESTERN® snowplow FloStat® hydraulic unit has a serial number. Record this serial number on the Owner’s Information page at the front of this manual.
What is the difference between UltraMount and UltraMount 2?
The UltraMount 2 system is designed for fast and easy attach and detach. It features a more robust one-piece design and is 100% compatible with existing mounts and electrical platforms. The FLEET FLEX electrical system provides true fleet interchangeability among current UltraMount® and UltraMount® 2 mounted snowplows.
Is there a Western@ snowplow manual?
PREFACE Welcome to the growing family of WESTERN@ snowplow owners. This manual will teach you how to operate and maintain your new WESTERN snowplow and will provide safety information. Please read this manual carefully and follow its recommendations.
What are the patents for the Western products snowplow?
This product is manufactured under the following US patents: 4,999,935; 5,420,480; 5,806,213; 5,806,214; 6,145,222; 6,209,231; 6,253,470; 6,526,677; RE 35,700; CAN 2,060,425; and other patents pending. Western Products offers a limited warranty on all snowplows and accessories.
How do I get my snowplow serviced?
When service is needed, your local Western distributor knows your plow best. Return your snowplow to the distributor for maintenance service or any other assistance you may require. We have enclosed in your owner’s manual packet a “Report Card” for your use.
How do you plow the snow?
Shear off top layers by plowing with the blade raised 3 to 4 inches for the initial pass. 2. Bite into the edges using only partial blade width until job is cut down to size for full blade plowing. Rule of thumb: 6” snow may be plowed with entire blade width, 9” with 3/4 blade, 12” with l/2 blade.