What is the purpose of the sock on drain tile?

The sock material will prevent the fines from the crushed rock from clogging up the inlet holes in your perforated or slotted pipe.

How deep should drain tile be buried?

If the drain tiles are implemented primarily to protect the foundation from subsurface water, dig the trench up to 6 feet deep. If the primary concern is surface water, a trench only 2 feet deep will suffice. Make sure that the trench extends to a suitable outlet like a ditch, drain field or dry well.

Does drain tile need to be sloped?

When you are installing Drain Tile, it is important to slope the Pipe 1/8” per linear foot. This means that every 8 feet there will be a drop of 1” in the pipe. This is vitally important for the heavier rains. Same as your sewer, if it was level, it could handle SOME of the water/sewage coming from your home.

What is a pipe sock?

Pipe Sock. Drain sleeve pipe socks prevent sand and silt from entering and clogging perforated drainage pipes.

What is the minimum depth for drainage pipe?

100mm deep
Pipes should be either: bedded on granular material, minimum 100mm deep, or. laid directly on the trench bottom, where the trench bottom can be accurately hand trimmed with a shovel but is not so soft that it puddles when walked on.

How do you install drain tile?

Dig a trench at least 24 inches deep and 12 inches wide that extends from the problematic low spots in the yard to an outlet such as a ditch, swale or pond. If you are installing the drain tiles next to a structure to address problems with seepage, dig the trench down to the depth of the footing if the moisture is a subsurface, not surface problem.

How to install drain tile?

Step 1 – Dig To The Footer. Digging to the footer can be difficult,which why it is best done immediately after completing a footer. If possible,rent

Step 2 – Lay Your Drain Tile.

Step 3 – Lay Your Gravel.

Step 4 – Lay Your Gravel Cover.

Step 5 – Water Outlet.

What are the different types of drain tile?

Quick Answer. Different types of field drainage tiles include clay, concrete and corrugated plastic tube. Different types of tile drainage system patterns include parallel, herringbone, double main and random.

How is a drain tile installed?

Dig the trench. Dig out a trench to put the pipe inside the hole.

Spread the Gravel. After making the whole trench,you should spread gravel inside the channel.

Use the Tarp. Line the ditch with Tarp.

Place the Perforated Drain Tile. Put the perforated drain tile in the center of the channel.

Test Case.

Fill the Trench.