What is macro description Cisco switch?

What is macro description Cisco switch?

Smartports macros provide a convenient way to save and share common configurations. You can use Smartports macros to enable features and settings based on the location of a switch in the network and for mass configuration deployments across the network. Each Smartports macro is a set of CLI commands that you define.

How do I configure a Cisco switch for home use?

How to Configure Cisco Switch: A Step-by-Step Guide with Commands

1. Connect the Switch to PuTTY.
2. Enter Privileged EXEC Mode and Set a Hostname for the Switch.
3. Assign a Password to the Switch.
4. Configure Telnet and Console Access Passwords.
5. Configure IP Addresses With Telnet Access.

What is Cisco smartport?

The Auto Smartports feature available on Cisco Catalyst switches allows a port to automatically detect that you’ve attached a device it can recognize (e.g. a Cisco IP Phone, wireless access point, video surveillance camera, etc.)

What is Switchport mode access used for?

Using the “Switchport mode access” command forces the port to be an access port while and any device plugged into this port will only be able to communicate with other devices that are in the same VLAN. Using the “Switchport mode trunk” command forces the port to be trunk port.

How do I manage a Cisco switch?

How to configure Cisco switch?

1. Step 1: Use an external emulator such as Telnet or a PuTTY to login to the switch.
2. Switch# configure terminal.
3. Step 2: Provide a hostname for the switch to function in a particular network environment.
4. Switch(config)#hostname switch.

What is macro auto smartport?

Auto Smartports Macros. Auto Smartports macros dynamically configure ports based on the device type detected on the port. When the switch detects a new device on a port, it applies the appropriate macro on the port. When there is a link-down event on the port, the switch removes the macro.

What is auto smartport?

What are switch ports?

Switch Ports which are physical opening where data cables are plugged in to connect the devices. Switch port type should be configured according to the requirement considering the factors like network architecture, speed and functionality.

What is Mode button on Cisco switch?

hello, the mode button is used for resetting the switch, entering day-zero setup mode, or changing an LED mode.