How high should an eyewash station be mounted?
The unit should be between 83.8 and 134.6 cm (33 to 53 inches) from the floor, and a minimum of 15.3 cm (6 inches) from the wall or nearest obstruction. With an eye wash station, the user should be able to open their eyelids with their hands and still have their eyes in the liquid.
What is the OSHA requirement for eyewash stations?
The OSHA requirements for emergency eyewashes and showers, found at 29 CFR 1910.151(c), specify that “where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate …
How close do eyewash stations need to be?
55 feet
Eyewash safety stations must be installed within 10 seconds or 55 feet from the hazard. The spray pattern must measure between 33”–53” from the floor the user will stand on (section 5.4. 4).
How do you activate emergency eye wash?
How to Use an Eyewash Station in an Emergency
- Activate the unit. Push the activation lever on the eyewash station.
- Flush out your eyes.
- Contact lenses.
- Keep on flushing.
- After flushing.
How does an eyewash station work?
The user must be able to operate an eyewash station with one hand and in a single motion in one second or less. Once activated, the water must stay on to allow the injured party to use their hands to hold their eyes open. The water should be “tepid” (defined as a temperature between 60°F–100°F).
Which of the following is an installation requirement for an emergency eyewash?
Installation / Location: Must be accessible within 10-seconds of hazard, approximately 55-feet (consult a medical professional to determine the appropriate distance for harsh acids and caustics; high hazard = closer distance) Must be located on the same level as the hazard.
Where should eyewash facilities be located?
The eyewash shall be located on the same level as the hazard and the path of travel shall be free of obstructions (no doors) that may inhibit its immediate use. located in an area identified with a highly visible sign positioned so the sign shall be visible within the area served by the eyewash.
Do eyewash stations require tempered water?
The standard states that the water temperature for the flushing fluid in an eyewash station must be tepid, which is between 60° and 100° F or 16° and 38° C. Tepid water helps encourage worker compliance to meet the full 15 minutes of flushing which helps prevent further absorption of chemicals and injury to the eyes.
How do you use emergency shower and eyewash?
How do I use a safety shower?
- Turn on the shower.
- Undress. This is no time for modesty.
- Don’t rub. Rubbing your skin can drive chemicals deeper or further damage already injured tissue.
- Stay put. Flush your skin for at least 15 minutes or until emergency medical assistance arrives.
How do you turn off emergency eyewash station?
Once an eyewash station has been activated it cannot be turned off. The eyewash solution will flow until the cartridges or reservoir have been emptied.