How do you change the battery in a Polar H7?
Directions to change battery:
- Using a coin, open the battery cover by turning it counterclockwise to OPEN.
- Using a sharp edge (knife), lift the battery out from inside the cap.
- Insert the battery (CR 2025) inside the cover with the positive side against the cover.
- Place the cover back into the connector.
Why is my Polar heart monitor not working?
Check that you have paired the heart rate sensor with the application. If paring does not work, check that bluetooth on the receiving device is enabled. When pairing, make sure you are far (10 m/ 33 ft) from other Bluetooth Smart heart rate sensor users.
How do you reset a Polar sensor?
To reset your heart rate sensor:
- Remove the battery.
- Press the metal snaps that attach to the strap with your fingers for at least 10 seconds.
- Wait 30 seconds and then put the battery back in.
What battery does a Polar heart rate monitor take?
You can check the battery level status from Polar Beat, the mobile training app. Go to Settings > HR sensor to see the status. The battery (CR 2025) can last up to 400 hours with daily one hour heart rate training sessions.
How do I pair Polar Beat with Polar h7?
To pair a heart rate sensor with Polar Beat:
- Wear the sensor.
- Open Polar Beat app on your Android or iOS device.
- Go to the settings section of the app and find HR sensor. When your sensor is found, tap PAIR.
What is the battery life of polar h7/h9/h10?
Battery lifetime of Polar H7 is about 200 hours. Battery lifetime of Polar H9 is about 400 hours. Battery lifetime of Polar H10 is about 400 hours. Is the receiving device positioned correctly? Keep the receiving device in front of you to ensure sufficient transmission range. A good place e.g. for a mobile phone is in a front pocket or handlebar.
What are the parts of a polar H7 heart rate sensor?
Polar H7 heart rate sensors have two parts: the chest strap & the connector. The heart rate sensor is worn around your chest, just below chest muscles. 1a. Moisten the plastic electrode areas on the reverse side of the strap. 1b.
How do I Find my Polar H6/H7/H9/H10?
Polar H6 / H7 / H9 / H10 along with its ID number is listed when the sensor is paired. The ID number is printed on the back of the sensor. iOS devices do not show Polar H6 / H7 / H9 / H10 in the bluetooth devices list.
What devices can the polar H7 transmitter communicate with?
The Polar H7 transmitter can also communicate with Polar compatible fitness equipment & Polar 5kHz training computers such as FT1, FT2, FT4, FT7, FT40, FT60, FT80, RS100, RS300X, RS400, A300, M400, RCX3, RS200, RCX5, CS100, CS200, CS300, and V800, M450, V650 & More.