How do I set up scanner on Epson DS 510?

How do I set up scanner on Epson DS 510?

Installation instructions:

1. Download the file.
2. Double-click the downloaded file to create a disk image on your desktop.
3. Open the disk image.
4. Double-click the installer icon to begin the installation.

Why will my Epson printer not scan?

Make sure the scanner is turned on. Turn off your computer and scanner, then check the USB cable connection between them to make sure it is secure. The scanner may not work properly when your computer is in standby mode (Windows) or sleep mode (Mac OS X). Restart Epson Scan and try scanning again.

Does Epson Scan work with Windows 10?

The Epson Scan might be set to Compatibility Mode after you upgrade your system to Windows 10. So the first thing you can do is verify Epson Scan is not set to Compatibility Mode. 1) Right-click on the Epson Scan icon on the desktop, then click Properties. 2) Go to Compatibility tab.

How do I reset my Epson DS 510?

Resetting the Scanner Roller Counter

1. Make sure the scanner is turned on and connected to your computer.
2. Do one of the following to open Epson Scan Settings: Windows 8.
3. Click Maintenance. You see a screen like this:
4. Click Reset. The number of scans changes to 0 (zero).
5. Click OK.

How do I clean my Epson DS 510 scanner?

How should I clean the inside of the product?

1. Press the power button to turn off the scanner.
2. Unplug the AC adapter.
3. Disconnect any connected cables.
4. Pull down on the cover open lever and open the scanner cover.
5. Use a soft, dry cloth to wipe off any stains on the rollers inside the scanner cover.

What software do I need to scan on my Epson printer?

Scan Documents Start your scan directly from your Epson scanner or from your computer using the Epson ScanSmart software.

How do I install Epson scan software?

Reinstall Epson Scan Go to the Epson Support page and search for your product. Select Downloads > Drivers and download the Scanner Driver and EPSON Scan Utility. Install the software.

How do I install Epson scanner software?

How do I install Epson Scan?

Epson Scan: Network setup

1. Open Epson Scan Settings.
2. Select your all in one printer or scanner from the drop down list. Note:
3. Set Connection Type to Network.
4. Click Add.
5. Click the IP address in the list and click OK. Note:
6. Click Test. Successful Test.
7. Expand the section below depending on the test results.

What software do I need to scan on my EPSON printer?

How do I install EPSON scan software?