How do I clean my garrison bottom loading water cooler?

How do I clean my garrison bottom loading water cooler?

How to Clean a Bottom-Loading Water Dispenser

1. Unplug the power cord from the electrical outlet.
2. Remove the water bottle.
3. Mix your cleaning solution in the water bottle.
4. Hook up the cleaning bottle.
5. Drain the reservoir.
6. Rinse the reservoir.
7. Replace parts and plug in.
8. Clean the water drip tray.

How do I clean my garrison water cooler?

How do I clean a hot water cooler?

1. Boil some water.
2. Pour enough boiling water into the cooler to fill the reservoir.
3. Drain some hot water through the spigots.
4. Scrub the inside of the reservoir with a clean, long-handled brush with soft bristles.
5. Drain out the water and rinse the reservoir well before you use the cooler.

How do I fix my water dispenser not cooling?

This is very easy to do: First, remove a few cups of water from your machine, then completely unplug your water cooler from the mains. We then suggest leaving your machine for 24 hours before switching it on again. After 24 hours, plug it back in and wait 6 hours for the water to adjust to a cooler temperature.

How often should you clean your water cooler?

So keeping your water cooler clean gives you the best chance of benefitting from all the watery goodness without any contamination, whether you’re using a bottled water cooler or a mains-fed water cooler. For a deep, sanitising clean, your water cooler should be thoroughly cleaned every six months.

Should I turn off water dispenser at night?

Do not install your water dispenser under di- rect sunlight or near heat emitting appliances such as ovens, dishwashers or radiators. Turn the appliance (power) off if you are not going to use it for a long time or at nights as it will not be used during the nighttime.

How often should a water cooler be cleaned?

every six months
So keeping your water cooler clean gives you the best chance of benefitting from all the watery goodness without any contamination, whether you’re using a bottled water cooler or a mains-fed water cooler. For a deep, sanitising clean, your water cooler should be thoroughly cleaned every six months.

Why is my water cooler not getting cold?

Check your freon levels if your water cooler is not providing you with cold water any longer. To do a reset, drain a few cups of water out of both the hot and cold sides of the water cooler. Then turn the switches in the back of the cooler off. Unplug your water cooler, and leave it unplugged for 24 hours.

How hot should hot water dispenser be?

Whenever you’d like to use hot water in your kitchen, you simply push the lever on the dispenser’s faucet and it comes right out. The temperature of the water is typically somewhere around 200 degrees (near-boiling point).

Why is my water cooler not cold?

Water cooler troubleshooting Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.