Can you connect 2 BNC cables together?
With the BNCC security coupler you can connect 2 BNC extension cables together to extend cable reach. Ideal for CCTV applications with security cameras, the quick connect feature makes it simple and easy to use.
What is a BNC female connector?
This BNC adapter provides the ability to interconnect two devices with BNC male interfaces. A common use for this device is to provide a coupling between two cables with BNC male connectors for when you need to extend the length of your BNC cables and can be used to join two male BNC plugs, or as gender changers.
Are all BNC cables compatible?
Types. BNC connectors are most commonly made in 50 and 75 ohm versions, matched for use with cables of the same characteristic impedance. The 75 ohm types can sometimes be recognized by the reduced or absent dielectric in the mating ends but this is by no means reliable.
What does BNC stand for in BNC connector?
(Bayonet Nut Coupling) A commonly used plug and socket for audio, video and networking applications that provides a tight connection. Using a mount somewhat similar to the way a bayonet (knife) is mounted onto the end of a rifle, BNCs are used to connect a variety of different coaxial cable types.
Can you splice a BNC cable?
How to Splice BNC Cables. An easy method to use when you want to splice two BNC cables together is to start by stripping off the covering over the wire. Next, you need to connect the center wires from each cable which you can do by crimping the wires together and using a butt connector.
How long can you run BNC cable?
BNC cables are used for connections from the camera to a DVR. BNC cables can be run up to 300ft (91m). We recommend using one solid line from the camera to the DVR to maximize signal strength.
Is BNC and coax cable the same?
BNC connector is used in coaxial cable for quick connector of radio frequency. BNC is known as Bayonet Neill-Concelman. BNC connector is used for composite video on commercial video devices. RG6 is a type of coaxial cable used for residential and commercial application and has a characteristic impedance of 75 ohms.
Why is it called BNC cable?
A little bit of history: The connector was named the BNC (for Bayonet Neill–Concelman) after its bayonet mount locking mechanism and its inventors, Paul Neill and Carl Concelman. Neill worked at Bell Labs and also invented the N connector; Concelman worked at Amphenol and also invented the C connector.
What is a BNC connector used for?
The BNC connector is used for composite video on commercial video devices. Consumer electronics devices with RCA connector jacks can be used with BNC-only commercial video equipment by inserting an adapter. BNC connectors were commonly used on 10base2 thin Ethernet network cables and network cards.
What are BNC connectors?
BNC connector. The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut.
What is a female cable connector?
A female connector is a connector attached to a wire, cable, or piece of hardware, having one or more recessed holes with electrical terminals inside, and constructed in such a way that a plug with exposed conductors ( male connector ) can be inserted snugly into it to ensure a reliable physical and electrical connection .