What size line does a Stihl AutoCut 25-2 use?

What size line does a Stihl AutoCut 25-2 use?

For example, the Stihl AutoCut 25-2 requires either a . 08-inch line or a . 095-inch line. However, each trimmer head model may vary slightly, so read the label on the package of your trimmer head.

How does the Stihl AutoCut 25-2 work?

The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.

How do you change the head on a Stihl AutoCut 25-2?

Instructions:

1. Check to make sure the appropriate deflector has been attached.
2. Block the shaft with a stop pin.
3. Screw on the AutoCut® C 25-2 trimmer head in a counterclockwise direction until it reaches the base.
4. Tighten the trimmer head while the shaft is still blocked.
5. Unlock the shaft by removing the stop pin.

Does Stihl make a speed feed trimmer head?

Stihl – Aftermarket Speed Feed 450 Speed Feed Trimmer Heads are the fastest loading bump feed trimmer heads. With no tabs or unlock covers, you can reload in under 30 seconds. The bottom cover taps on the ground to feed more line. Speed Feed trimmer heads are recommended for straight shaft trimmers.

Does echo speed feed 400?

ECHO Speed-Feed 400 is built for rugged applications where medium to heavy-duty cutting are required. The universal Speed-Feed Head – 99944200907 is compatible with ECHO SRM trimmers, as well as other brand trimmer models. The GT version – 99944200908 will only fit ECHO GT curved shaft trimmers.

How many cc is a Stihl FS 56?

Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty….Simplified Starting Procedure.

POWER SOURCE	Gas
ENGINE POWER	1.07 bhp
FUEL CAPACITY	11.5 oz.
DISPLACEMENT	1.66 cu. in.