How do I program 16f877a?

How do I program 16f877a?

MPLABx Setup Steps

1. Step1: Open the MPLABx software and select the New project from File Menu as shown below.
2. Step2: Select the Standalone option for the project.
3. Step3: Choose the Controller(PIC16f877A) from the device drop down.
4. Step4: Select the required programmer.

Which is the best PIC microcontroller?

PIC18f452. The popular and powerful PIC microcontroller comes as an 8-bit CMPS FLASH-based microcontroller type. It contains 34 I/O pins and comes with one 16-bit and 8-bit timer, 10-bit A/D converter, SPI, I2C, and USART peripherals.

How can I make a picture programmer?

PC (for programming the PIC that goes into the PicKit)…Materials Needed:

1. 2 x 100nF ceramic capacitor.
2. 2 x 15pF ceramic capacitor.
3. 2 x 47uF 16v electrolytic capacitor.
4. 1 x 10uF 16v electrolytic capacitor.
5. 2 x 1N4148 diode.
6. 1 x PIC18F2550.
7. 1 x 28 pin thin IC socket (for the PIC18F2550)
8. 1 x 680uH inductor, resistor-like package.

What is pic16f877a?

Introduction to PIC16F877a PIC16F877a is a 40-pin PIC Microcontroller, designed using RISC architecture, manufactured by Microchip and is used in Embedded Projects. It has five Ports on it, starting from Port A to Port E. It has three Timers in it, two of which are 8-bit Timers while 1 is of 16 Bit.

What is the best compiler for pic16f877a?

The official compiler is MPLAB XC8 compiler which is developed by manufactures of PIC16F877A. We generally recommend Mikro C for pic compiler for beginners and MPLAB XC8 compiler for those who want to learn pic microcontrollers programming from register level bare metal concepts.

What are the different types of interrupts provided by pic16f877a microcontroller?

PIC16F877A microcontroller provides 8 types of interrupts namley; External interrupts, timer interrupts, PORT state change interrupts, UART interrupt, I2C, PWM interrupts. you can read this guide on pic microcontroller interrupts for additional information. Comparator module : It has a comparator module which composed of two comparators.

Does the PIC16F877 have a watch-dog timer?

The PIC16F877 has a built-in watch-dog timer which is built into the chip, but it operates or can operate independently from the other PIC hardware. It can be enabled and disabled from software with an adjustable time-out time, and the PIC has a special instruction, “CLRWDT”, which resets the watch-dog timer.