What is video balun BNC to CAT5?
The Balun-4PHUB is a 4 channel passive video balun transceiver used with analog CCTV and HD coax security cameras. It converts 4 BNC coax video inputs to a single RJ45 CAT5 connection. As a passive solution, it transmits video from up to 4 BNC security cameras up to 1200 feet.
How do you convert a non PoE camera to PoE?
Simply connect an Ethernet cable from a non-PoE switch to the injector, plug in the power cable, and then run a third PoE cable from the injector to your PoE enabled powered device. In essence, a PoE injector converts two inputs – a power cable and a data cable – into a single (PoE) output.
Can you use Cat 5 cable for security cameras?
Security cameras can be operated using only CAT-5 for both video and power. Category 5 cables and category 5 enhanced cables are normal copper 24 AWG, or American wire gauge, wires. They can carry current to devices that require low-voltage electricity. It can provide up to 15.4 watts of power.
What is the purpose of video balun?
A video balun is a wire connector device that allows UTP cable (such as CAT5) to transmit the video signal from CCTV cameras instead of using coaxial cable such as RG59. Can power also be transmitted using CAT5 baluns? Some video baluns have power terminals in addition to video.
What is BNC balun?
The VB-2V is a BNC balun pair is a CCTV wiring solution that allows a CAT-5 cable to transmit video at a distance up to 1100 feet from a CCTV camera to a recorder or other video input device. 18AWG, 20 AWG, 22 AWG and CAT5 can all be used with these BNC baluns. These baluns work with NTSC and PAL camera types.
How does video balun work?
A UTP balun, aka video balun, converts a 75-ohm video signal to 100-ohm impedance for Cat5 cable. On the other end, the receiving balun then converts the signal back to 75 ohms. In order to use baluns for video transmission, the application needs 2 baluns (one on each end of the Cat5 cable run).
How do you wire a CAT-5 camera?
You need to run 1 length of CAT5e cable from the DVR recorder to each camera. The cable is going to do 2 jobs. One pair of wires will handle the video signal, the other 3 pairs of wires will be combined to take 12 volt power from the transformer located next to the DVR to the camera.
Which type of cable usies a BNC connector?
The BNC is a connector type commonly used on Siamese cables, coaxial cables, twisted cables, and other cables. It is compatible with transmitting the intended signal. The terminals of the coax cables get mounted with the male-type of BNC connectors.
What is a BNC connector used for?
The BNC connector is used for composite video on commercial video devices. Consumer electronics devices with RCA connector jacks can be used with BNC-only commercial video equipment by inserting an adapter. BNC connectors were commonly used on 10base2 thin Ethernet network cables and network cards.
What is CCTV BNC?
BNC connectors are used in video applications with RG59 and RG6 coaxial cable. They are the industry standard connector for CCTV video surveillance systems. Almost always, devices such as CCTV cameras, surveillance DVRs , and security monitors have a BNC female video input or output on them.
What is BNC port?
The BNC connector is called an uplink port and it is used to connect multiple hubs together. If you have more users you can get another hub with another BNC uplink port, then connect those 2 together with a piece of BNC cable, 2 t-connectors and 2 50ohm terminiators.