What can you use in place of bar and chain oil?
6 Chainsaw Bar & Chain Oil Alternatives
- Vegetable Oil. Vegetable oil is one of the safest alternatives available to oil your chainsaw.
- Canola Oil. Similar to vegetable oil, canola oil is another super-safe alternative.
- Motor Oil.
- Hydraulic Fluid (Diluted)
- Drained Motor Oil (Diluted)
- Drained Hydraulic Fluids (Diluted)
What oil can be used for chainsaw bar oil?
canola
Rapeseed-based (usually called canola) oil is currently the most common environmentally compatible chain-and-bar lubricant. Vegetable-based oils are triglycerides or natural esters that come from agricultural crops.
Can I use SAE 30 for bar and chain oil?
Chain saw bar and chain oil isn’t rated by SAE like traditional automobile motor oil. If your manufacturer’s bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Is bar and chain lubricant the same as oil?
It cuts the same with old oil or new.” Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry’s tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
Can I use 10w30 for chainsaw bar oil?
Normally, you would need to use bar and chain oil to lubricate your chainsaw because this type of oil was specifically formulated to be used on chainsaws. As a matter of fact, you can actually use regular 10w30 motor oil on a chainsaw as one of the alternatives in case you don’t have bar and chain oil.
Do Electric chainsaws need bar oil?
Electric chain saws derive their power from an electric source, so they don’t need fuel to run. Electric chain saws don’t require this added oil, but the bar and chain do need to be properly lubricated. Electric chain saws use the same type of lubrication for the bar and chain as gas-powered chain saws.
Can I use 5w30 for chainsaw bar?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can you use transmission fluid for chainsaw bar oil?
On occasion I’ve used tranny fluid to clean out old oil residue in old chainsaws . It works well . In addition to that tranny fluid seems to pump better on some saws with whimpy oilers in cold weather .
What viscosity is bar and chain oil?
What viscosity is chainsaw bar oil? The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Can I use synthetic oil for chainsaw bar oil?
To summarize, yes you can use synthetic motor oils in your chainsaw to lubricate the bar but you shouldn’t want to out of considerations for the environment and yourself.
What oil is best for electric chainsaw?
Electric chain saws can use only bar and chain lubrication oil in their systems. These oils are specifically designed for this kind of lubrication. They are also manufactured to be safe for the environment. Any other kinds, like reclaimed motor or vegetable oil, can damage the oiling system.
Can you use transmission fluid for chainsaw bar?