How do I fix the code on my LG washing machine?
To reset the washer, unplug it and press the Start/Pause button for five seconds before plugging it back in. The LE code can indicate that the washer has been overloaded; large loads and bulky items can strain the motor. Remove a few items from the washer to reduce the load size and restart the cycle.
How do I unlock my childs LG washer?
To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.
What causes le code on LG washer?
An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. But if the error code displays on every washing cycle, the unit will require a repair service.
What is De symbol on LG washer?
A dE error code indicates that the washer door was unable to lock. This can normally be resolved by performing a simple reset on the washing machine. How to reset the washing machine: Press POWER to turn the washer off.
Where is the Hall sensor on LG washer?
The hall sensor is mounted on the stator, on the back of your motor. In most cases, you can access the stator by unplugging the washer and removing the rear panel of your machine to expose the motor.
How do I force drain my LG washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
How do you fix a Le error?
An LE error code on the washer’s display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.
How do I fix de error?
On your Samsung washer, the “dE” error code typically occurs just after the rinse cycle. This will leave your machine filled with water as it does not drain because the washer thinks that the lid is open. Reset the cycle to properly drain the water then stop it before it fills up again.
How do you clear the CL code on a LG dryer?
A CL code or CHILD/CONTROL LOCK reading on the dryer’s display is not actually an error code, but rather an indication that the Child/Control Lock feature is active. For most models, press and hold the key labeled CHILD LOCK (secondary function) for 3 seconds to disable the Child Lock feature.