Can you turbo a h22a?
Short of the K-series motors, the H22 has the most torque out of any Honda four-cylinder motor and backs it up with 200-plus hp. Bolt a turbo setup onto a stock H22 and it becomes a very potent machine. Build a turbo motor out of an H22 and it’s unstoppable.
How much horsepower does a h22a VTEC have?
H22A2. Found in the European 4th gen Prelude 2.2i VTEC (BB1). It produces 185 PS (136 kW; 182 hp) and comes with a black valvecover.
Can a K24 engine handle a turbo?
Since the K24 can handle forced induction well, it’ll come as no surprise that many owners opt to go down the turbocharged route with their build. There’s certainly no shortage of turbocharged K24’s out there, but there’s also a decent amount of supercharged ones, too.
What year TSX has K24A2?
The 2004 model year TSX’s powertrain consisted of a 2.4-liter inline four-cylinder K24A2 engine which produced 200 horsepower, a six-speed manual transmission (which featured a special casing, to reduce weight), and a front wheel drive layout.
What’s the difference between a K24A and an K24A2?
From what I understand, it’s completely different. Your K24A2 has 3-lobe VTEC while the K24A is just intake side. With that being said, you’d at least need a new wiring harness, and probably a different ECU. K24A2’s aren’t that expensive anyway.
How much power can a Honda Prelude make?
A stock Prelude puts out about 156hp to the wheels and your enhancements are very unlikely to produce more then an additional 5hp up to maybe 161hp at the wheels .
What is the difference between H22 and H23 engines?
This series included two engines: H22 and H23. The H22 engine got a 4-cylinder aluminum cylinder block, its cylinder wall was lined with FRM coating. The H22 cylinder block height was 219.5 mm.
What is the difference between h22a8 and H22A Type S?
Its headflow was slightly better than in H22A Type S. This engine was designed for EDM Honda Accord Type-R. Its power was 212 HP @ 7,200 rpm, the torque was 222 Nm @ 6,700 rpm. 8. H22A8 Red top was an analogue to the H22A7 engine for the European Honda Prelude VTi and Prelude VTi-S.
How many types of H22 engines are there in Honda?
There are two versions of H22A for JDM Honda: H22A Redtop and H22A Blacktop. – H22A Redtop has a red valve cover. This is the most dynamic out of all H22 engines, it was installed in Honda Prelude Type S and SiR S-Spec, and in Honda Accord Euro R.
What is the crankshaft size of a H22A?
A 90.7 mm stroke crankshaft and balancer shafts were installed. H22A piston rod length was 143 mm, the bore was 87 mm, and their compression height was 31 mm. This provides the displacement of 2.2 l.