How much are washer boards?

These boards feature a full 1″ thick exterior grade baltic birch frame, convenient rope carrying system, and the ability to use our washer locker to store washers with your boards….Quantity Pricing.

Quantity	Price
2 – 4	$137.74
5+	$130.49

What size washer do I need to play washers?

The object of the game is to earn points by tossing metal washers, usually around two inches in diameter, and 1/8 inch thick, toward a hole, usually denoted by a can or PVC pipe, often in a box.

How big are the holes for 3 hole washer game?

16″x48″
Official 3 Hole Washer Board Dimensions: Our preference is for 16″x48″, which is what these directions are based on.

What is the distance for washer boards?

about 20 feet
Washer boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.

How far do washer boards need to be apart?

about 20 feet apart

How far apart are washer boards?

Before you start tossing, you have to set up the field. Washer boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.

How far apart are washer toss games?

20 feet
Game Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.

How do you play washer boards?

Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.

How to build a washer board game?

Cut the 2x4s and plywood to size and sand them smooth.

If you don’t have actual clamps,your spouse or a friend can be your clamps here.

Predrill holes and attach the plywood to the base with the 1¼-inch screws.

Take the boxes outside and spray two or three coats of spar urethane on them,following the instructions on the can.

If you’d prefer a splash of color,use spray paint. Bring your washers out,too,and paint them,four of one color and four of another color.

Cut the carpet into two 13×13-inch squares. Flip them over and draw lines from corner to corner to help you find the center.

Use a utility knife or sharp scissors to cut out the outer circle.

Then trim the cut out circle to the inner circle.

Place the carpet square in the box using all-purpose adhesive to secure it to the plywood if you aren’t using adhesive-backed carpet.

What are the game rules for washers?

Rules for the Game of Washers. Games are played to 21 points and must be won by a two-point margin. The washer players in your family may introduce everyone to some other colorful washer terms, like “skunk,” which is when one player gets to a score of 11 before the other scores a point, prematurely ending the game.

What size are the washers in the washer game?

There are three common sizes that most players pitch: 2 inch (outer diameter) 2.25 inch, and 2.5 inch. 2 Inch Washers. 2 inch diameter washers are popular to play a washer toss game with because they are smaller than most washers that are pitched, making them perfect for beginners and small children to play with.

What are the dimensions of a washer game?

Washers is an outdoor game of skill, played by two or more contestants. The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter (101.6 mm) positioned a specific distance apart, toward which players throw washers to score points. The official distance, from cup centers, is 25 feet (7.62 meters).