Why does my Canon printer keep saying paper jam?

Why does my Canon printer keep saying paper jam?

Make sure your printer paper is correctly seated into the slot or tray. If Canon printer has a paper tray, do not fill the tray to capacity. Overfilling the paper tray is frequently the cause of paper jams. If the slider is not properly positioned, it can cause a paper jam.

How do you get jammed paper out of a Canon printer?

Solution

1. Turn off the printer and unplug it.
2. Retract the paper output tray and open the cover. Important.
3. Check if jammed paper is under FINE cartridge holder.
4. Hold jammed paper firmly in both hands.
5. Slowly pull out paper, so as not to tear it.
6. Make sure all jammed paper is removed.
7. Close cover.

Why is my printer saying paper jam but there is no jammed paper?

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.

Why does my printer always paper jam?

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.

Why is my Canon printer not feeding paper?

If the paper feed rollers are dirty or have paper dust on them, the paper may not be fed properly. When this happens, you’ll need to clean the rollers twice: once with paper loaded, and once without.

Why is my printer not grabbing the paper?

The paper might not be engaged with the feed rollers. The paper-width guide is pressed against the paper stack too tightly. The paper tray is not completely inserted into the product. The paper settings in the print driver do not match the paper loaded in the paper tray.

How do I load paper in my mx892 printer?

Learn how to load paper in the cassette and rear tray of your PIXMA MX892 printer. You can load plain paper in the cassette, and photo paper and envelopes in the rear tray. You can also load documents in the ADF (Auto Document Feeder).

How do you print on a canon Pixma printer?

Open the paper output tray gently. After loading paper, select the size and type of the loaded paper on the print settings screen of the operation panel or printer driver. You should load photo paper, and plain paper other than A4, B5, A5, or Letter size in the rear tray. Align the edges of paper.

How do I remove a jammed paper from the scanning unit?

When standing the machine, make sure that the Scanning Unit (Cover) is closed securely. Slowly pull the jammed paper out so that the paper does not tear. Set the machine back to its original position immediately after removing the jammed paper. Align the paper, then reload it in the Cassette.

How to resolve the document Jam error in the document feeder?

Close the Document Feeder Cover, then turn on the machine. When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, service is required.