How many bags of mold does it take to make concrete?
Fill the mold with 80 lbs of concrete mix (1 80lb bag fills 1 mold), trowel and remove the mold. For best results, use QUIKRETE Crack Resistant Concrete.
How many bags of concrete do I need for a Walkmaker?
TIP: each 2’x2′ Walkmaker form is designed for use with one 80-pound bag of QUIKRETE concrete Mix.
How much quikrete do I need for mold?
6921-32) is a reusable plastic mold in a Cobblestone pattern. Fill the mold with 80 lbs. of concrete mix (1-80lb bag fills 1 mold), trowel, and remove the mold. Customize the color with QUIKRETE® Liquid Cement Colors.
What kind of cement do you use for stepping stone molds?
A good general-purpose sand-mix concrete is probably the best choice. An 80-pound bag should be enough to cast 5 to 6 stones, depending on their size. The texture is fine enough to allow you to embed decorative glass or pebbles, and it can easily accept imprints.
Can you use Quikrete for Stepping Stones?
Kathy Adams is an award-winning writer. While premade stepping stone cement mix is an option for making your own stepping stones, it’s not the most cost-effective. Instead, whip up as many stones as you like using Quikrete and water.
What kind of cement is used for molds?
Using a mix like Cement All, Quick Setting Cement or Portland cement at a 3:1 or 2:1 ratio with sand is going to be your best bet. Chances are if you are building a large form, and using melamine, then you can use a low aggregate mix or a higher aggregate mix.
How do you make a stepping stone mold?
Pour two inches of concrete into an ice cream bucket, and it will shape a perfect round stepping stone. Five-gallon utility pails. Just as with ice cream buckets, pour two to three inches of concrete in the bottom of a plastic utility pail to shape concrete into a round stepping stone. Leftover pizza boxes.
How do you make a Quikrete walk maker?
The QUIKRETE® Walk Maker™ Building Form-Country Stone Pattern (No. 6921-32) is a reusable plastic mold in a Cobblestone pattern. Fill the mold with 80 lbs. of concrete mix (1-80lb bag fills 1 mold), trowel, and remove the mold. Customize the color with QUIKRETE® Liquid Cement Colors.
How do you make a walkmaker pattern?
WALKMAKER ™ – Country Stone Pattern. The QUIKRETE® Walk Maker ™ Building Form-Country Stone Pattern (No. 6921-32) is a reusable plastic mold in a Cobblestone pattern. Fill the mold with 80 lbs. of concrete mix (1-80lb bag fills 1 mold), trowel, and remove the mold. Customize the color with QUIKRETE® Liquid Cement Colors.
How much concrete do you put in a Quikrete mold?
The QUIKRETE® Walk Maker™ Building Form-Country Stone Pattern (No. 6921-32) is a reusable plastic mold in a Cobblestone pattern. Fill the mold with 80 lbs. of concrete mix (1-80lb bag fills 1 mold), trowel, and remove the mold.