What counts as a dangerous MOT fault?

What counts as a dangerous MOT fault?

Finally, a fault classed as ‘dangerous’ is one that poses an immediate risk to the safety of the driver and other road users. As such, if a vehicle has a dangerous fault then it should not be driven until the fault has been rectified. This will also result in an immediate MOT failure.

Will a rear door not opening fail an MOT?

If rear doors are fitted to your vehicle they may need to be opened to allow the inspector into the rear of the vehicle to test other MOT items. Broken or damaged hinges that prevent the door from being securely fixed to the vehicle. In the interests of safety this will result in an MOT failure.

What can fail an MOT 2020?

What Are The TOP 10 MOT Failures 2020?

  • Lights. A blown light bulb is one of the most common MOT failures, and one of the easiest to resolve.
  • Windscreen wipers. Faulty windscreen wipers are another common MOT fail.
  • Tyres.
  • Brakes.
  • Exhaust.
  • Seatbelts and airbags.
  • Steering.
  • Suspension.

What is classed as a dangerous MOT failure?

What is a dangerous MOT fault? If your vehicle has a fault categorised as dangerous it cannot be driven until that fault has been repaired. Dangerous faults include having no functioning brake lights, or a steering wheel so loose that it’s likely to become detached.

Is a missing exhaust heat shield an MOT failure?

Missing heat shields Only fail a vehicle for missing heat shields if there’s a risk of fire with other fuel system components. Use failure item: 6.1.

Can I take my car to another garage if it fails MOT?

Can I Book an MOT Retest at a Different Garage? No, you must have your MOT retest completed by the same garage that did the original test. While you can take your car away for repairs, another garage would charge you the full fee to issue the pass certificate.

What’s checked on a MOT?

An MOT involves dozens of checks on your car, ranging from the brakes and fuel system to lights, mirrors, seatbelts, windscreen wipers and exhaust system. It doesn’t cover the condition of the engine, clutch and gearbox.

Can a car fail MOT on rear wiper blades?

A chip or crack bigger than 40mm, or wider than 10mm in the area where the wipers sweep, will lead to a failed MOT test. It may be worth checking your rear windscreen and wiper too for any damage, even though your vehicle can’t fail its MOT test for this.

Can you fail MOT for no rear wiper?

Your front windscreen wipers must work, and be in good enough condition to clear the windscreen – so dirty the screen a little and give them a test. If your rear windscreen wiper isn’t working, don’t worry too much as it’s not part of the test, but it’s still something you should look at getting repaired.

Do mots still have advisories?

MOT testers will still give advice about items you need to monitor. These are known as ‘advisories’.

Can you still drive a car with a failed MOT?

It’s illegal to drive without a valid MOT. If your car has failed, and the date on your certificate has passed, you can only drive your car to be repaired or to a pre-arranged MOT appointment, and only if it is roadworthy.

What do the codes on an MOT fail sheet mean?

MOT Fail Sheet. Listed on your MOT fail sheet is a code as to why your vehicle has failed its MOT test check. The code listed applies to the section of the MOT test that the vehicle failed. For example, code 6.1.b.2 can be broken down to the following; Section 6.

What does the MOT fail list list mean?

MOT Fail List. Listed on your MOT fail sheet is a code as to why your vehicle has failed its MOT test check. The code listed applies to the section of the MOT test that the vehicle failed. For example, code 6.1.b.2 can be broken down to the following; Section 6. Sub-Section 1. b Subject. 2 Reason for fail.

What are the rules for an MOT fail?

Nuisance The MOT inspection includes rules for noise, exhaust emissions, engine malfunction indicator lamp (MIL) and fluid leaks. All defects in this category count as “Major” or “Dangerous” and will trigger an MOT fail. MOT Fail Codes: Section 8.

What is a failmot fail code?

MOT fail codes are composed of a Section, Subsection, Subject and Defect that explain exactly what is wrong and needs to be addressed so that your car can pass the MOT. For example: Section (e.g., 1.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top