Why is my Philips DVD player not working?

Why is my Philips DVD player not working?

Unplug the unit from the electrical outlet. Wait 30 seconds and then plug it back in to the outlet. Press the “On” button on the player. If the player does not come on, unplug it again and try a different outlet.

How do I get my Philips DVD player to work?

How to connect

  1. Connect the component video cable to the COMPONENT VIDEO OUT connector on your player and the COMPONENT VIDEO IN connector on your TV. Match the color of each cable to the connector.
  2. Connect the audio cables to the AUDIO OUT connectors on your player and the AUDIO IN connectors on your TV.

How do I reset my Philips DVD player?

How to reset my Philips DVD player?

  1. Press the “Standby On” on the front of the DVD player.
  2. Press the “Open/Close” on the front of the player to open the disc tray.
  3. Press the “1” on the remote control. The blue Philips DVD background appears on the TV screen.

How do I increase the volume on my Philips DVD player?

VOLUME Activate volume control, and then press / to change a volume level.

Why does my DVD player keep saying no disc?

When the message NO DISC, DISC ERROR, or INSERT DISC appears on the display on the DVD player, check the following: Make sure there is a disc in the player. Make sure the disc is inserted correctly with the playback side facing down on the disc tray. Make sure the disc being used is supported by the player.

How do I connect my DVD player to my HDMI TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

How do I connect my Philips portable DVD player to my TV?

How to connect my Philips portable player to TV?

  1. Connect the mini-plug to the AV OUT jack of the player.
  2. Connect yellow plug to the VIDEO IN jack of the TV.
  3. Connect red-plug to the AUDIO IN R jack of the TV.
  4. Connect white plug to the AUDIO IN L jack of the TV.

How do I reset my DVD player?

On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET .

Why does my DVD player say no disc when there is one?

Why is the volume so low on my DVD player?

The quietness may happen due to human error, issues with your DVD player/TV, or it may happen due to the bad quality of the DVD. If your DVD is quiet, then there is a possibility that you do not have the right settings on the DVD player, TV, or sound bar (depending on which you are using).

Why is my Blu-ray player sound so low?

If the volume is very low, select the Audio DRC or BD Audio Mix on the Blu-ray Disc player to Off . Set the BD Audio Mix setting of the Blu-ray player to On if there’s no sound once the movie started. Audio settings you can select in the Blu-ray player menu. Auto: Normally select this.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top