Where is the WPS button on my Canon printer?

Where is the WPS button on my Canon printer?

There are two ways you can access the WPS settings either through the Setup OR by pushing the WPS button on the printer. On some printer models, this button is not available, therefore to access it you will need to enter the printer’s setup menu which is usually indicated by Tools/Wrench icon on the printer’s panel.

How do I connect my Canon Pixma mg3170 printer to WIFI?

Most WPS enabled access points use this protocol.

1. Press and hold the [Maintenance] button (A) on the printer for approximately 5 seconds.
2. Press the [Fit to Page] button (A).
3. Make sure that the LED flashes as shown in the illustration above, then press the [WPS] button on your access point within 2 minutes.

What is WPS button on Pixma printer?

PIXMA MX534 Wi-Fi Setup Guide. Some access points (often called routers or hubs) feature an automatic connection button labelled “WPS” which stands for Wi-Fi Protected Setup and allows permitted devices to connect to your network without needing to enter a password.

How do I connect my wireless printer without WPS button?

Click the name of your printer, and then click Options & Supplies. Click Utility, and then click Open Printer Utility. In HP Utility, click Wireless Setup. Make sure your network displays on the Confirm Wireless Settings window, and then click Continue to complete the wireless configuration.

How do I get my Canon printer to recognize my wireless network?

Connecting your Canon printer to your Wifi should be as easy as pie once you follow these steps:

1. Press the power button to turn on your printer.
2. Press the Settings button .
3. Press the arrrow button until you see LAN Settings, press OK.
4. Press the arrrow button until you go to wireless LAN setup, press OK.

How do I connect my Wi-Fi to my Canon printer?

Connecting Device to Printer

1. Turn on wireless communication on your computer or smartphone. For Android or iOS, enable “Wi-Fi” on your device’s “Setting” menu.
2. Select “XXXXXX-iP110series” (“XXXXXX” represents last six digits of printer’s MAC address.) from SSID list displayed on device.
3. Enter password.

How do I connect my Pixma mg3520 or mg3522 printer to WPS?

Learn how to connect your PIXMA MG3520 or MG3522 printer to your wireless network using WPS. Solution To connect your printer to the network with this method, your wireless router must have a WPS™ button on it.

Where is the WPS button on a Canon printer?

How to Locate the WPS button your Canon Printers. If the button is available, take a close look at the buttons on the printer to identify a button with a wireless icon. Press this button and then press the WPS button on your router within 2-minutes.

How do I connect my Pixma mg3120 or mg3122 to my home network?

Learn how to use WPS (Wi-Fi Protected Setup) to connect your PIXMA MG3120 or MG3122 printer to your home network. WPS (Wi-Fi Protected Setup™) allows you to connect your printer to a wireless network even if you don’t know the wireless network name (SSID). All you need is a Wi-Fi ® router that supports WPS.

How do I connect my printer to my router without WPS?

If your router doesn’t have a WPS button on it, you can use the cableless setup method. Connect your printer to the network Locate the WPS button on your router before you begin. Make sure the printer is turned ON.