What would cause my Kenmore dryer not to heat?
Over time, the heating element can burn out, causing the dryer not to heat. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it. Over time, the heating element can burn out, causing the dryer not to heat.
Where is the thermal fuse located on a Kenmore 80 series dryer?
If your dryer has the lint screen that pulls out of the top panel of the dryer then the thermal fuse will be located inside the back panel of the dryer as shown in the second image. and remove the back panel of the dryer to access this location.
Where is the thermal fuse on my Kenmore dryer?
To access the Kenmore dryer thermal fuse, disconnect the exhaust duct from the dryer’s outlet and remove the rear panel. The thermal fuse is a rectangular component near the Kenmore heating element with wiring terminals on each end, reveals Appliance Repair.
What is wrong with a dryer when there is no heat?
Common reasons for an electric or gas dryer not heating are a tripped circuit breaker, clogged vent, and no gas flow. Other potential reasons include a faulty thermal fuse and broken heating element. If you gather your tools and follow this guide, you may be able to solve basic dryer heating problems on your own.
How do I know if my dryer thermal fuse is blown?
These simple steps summarize the process below:
- Unplug your dryer and ensure it is no longer connected to the gas or electric.
- Locate the thermal fuse, as above.
- Disconnect the thermal fuse from the wires.
- Test the fuse with a multimeter.
- If the needle on your multimeter does not move, your thermal fuse is blow.
Why is my Kenmore dryer not heating up?
Identify why the heater is not working. Generally, there are a few common things that will stop a Kenmore dryer from heating up. Improper voltage will keep it from working, as the circuit breaker might have popped because your dryer and another appliance are plugged into the same outlet.
Why is my dryer heating but not drying?
One of the most common reasons for a dryer not heating is inadequate voltage. Most dryers must operate on 240 volts to produce enough heat to dry clothes, but according to RepairClinic.com, a dryer can still tumble with partial power even if the heating function is not working adequately.
What is the heating element for a Kenmore dryer?
Where is the heating element on a Kenmore stackable dryer? Locate the large canister that has a wiring harness attached to it. The heating element is inside the canister. Unplug the canister element harness and remove the screws that hold the cover to the canister. Disconnect the wiring harness that plugs into the heating element located inside