What is the brace height for a Bear Kodiak Hunter?

What is the brace height for a Bear Kodiak Hunter?

8″ – 9″
Manufacturer recommended brace height: 8″ – 9″. Replacement string length of 56″.

What should my bow brace height be?

These guidelines work for most recurve bows, but always follow the manufacturer’s recommended brace-height range. 62- and 64-inch bows have 7½- to 8½- inch brace heights. 66- and 68-inch bows have 8- to 9-inch brace heights. 70- and 72-inch bows have 8¾- to 9½-inch brace heights.

How does brace height affect a recurve bow?

The vast majority of recurve bows have a brace height somewhere between 7.5 and 9.75 inches. The brace height of your bow will dictate some of its behaviors, such as how loud it shoots and how much pivoting your arrow will experience mid-air. By twisting the string as you string your bow.

What does increasing brace height do?

Raising the brace height will increase your draw weight slightly and you will give you a slightly slower arrow and lowering your brace height will slightly lower your draw weight and give you a slightly faster arrow because the arrow stays on the string a little longer because of the lower brace height.

Does brace height really matter?

It’s long been said that brace height is a key factor in a bow’s accuracy. Shorter brace height bows tend to have the reputation of being tough to tame. Instead of a bow with a 5″ brace height they would select a bow with a 6″ or 7″ brace height to maximize their accuracy.

Does brace height affect draw length?

Brace height does not factor into draw length.

Why is a longer brace height more forgiving?

Longer brace height Bows with longer brace heights are going to be more forgiving. This is because the arrow is coming off of the string sooner rather than later, meaning that the shooter has less time to influence the shot. These are also usually a bit slower in terms of fps.

How does brace height affect draw length?

A longer brace height puts more distance between the throat of the bow grip and the bowstring. This means that the bowstring won’t be drawn as far to reach the shooter’s draw length.

What is a forgiving brace height?

Anything greater than 6 inches falls into the more forgiving category. Of course, brace heights greater than 7 inches produce the most forgiveness. But, given the advancements in bow technology, I see no reason a solid shooter couldn’t shoot as well with a 6 1/2-inch brace height as a 7-inch brace height.

How does brace height affect speed?

Brace Height Affects the Speed of Arrow That is because of the smaller the brace height, the faster the arrow. When you release the arrow, it is in contact with the string even after the string is straight. Even after its shot, the arrow will remain in contact with the string for longer if the brace height is low.

Does brace height affect arrow flight?

Brace height decreases the power stroke of the bow. That means if you have a perfect arrow that hits where you want, if you increase the BH, you lose a slight amount of stroke, which will make your arrow hit slightly to the left (if you are righthanded).

Do you want a longer or shorter brace height?

These two variables define the angle at which you are pulling up on the string (vertical torque). The shorter the brace height, the greater the angle and the greater the vertical torque.”

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top