What is NLGI GC LB grease?

What is NLGI GC LB grease?

NLGI-certified is a common phrase when talking about greases. Some greases have a NLGI certification mark. For example, a designation of LB means that the grease is suitable for use as a chassis lubricant and a GC-LB designation means that the grease is suitable for use in wheel bearings or as a chassis lubricant.

What is Gc LB?

An NLGI 2 grade is typically the specification used in automotive greases. For example, greases may be rated as GC or LB. GC is recommended for axle and wheel bearing grease, while LB is the industry standard for chassis grease used on tie-rod ends, ball joints, U-joints and control-arm shafts.

What would NLGI 2 GC grease be recommended for?

The AFG-2 grease is designed to be used in different types of applications: industrial, automotive, heavy machinery, recreational vehicles and others. The AFG-2 grease can be safely used for the lubrication of electric motor bearings as opposed to conventional EP greases.

What do NLGI ratings mean?

The NLGI number is a measure of the grease’s consistency as indicated by its worked penetration value. The higher the consistency, the more resistant the grease is to releasing lubricating fluid under force. A grease with a low consistency will release lubricating fluid more readily.

What is the difference between NLGI 1 and NLGI 2 grease?

There are two basic types of grease for most equipment and machinery applications: NLGI #1 grease and NLGI #2 grease. So what’s the difference? Less thickener makes a #1 grease more tractable and slippery, while #2 grease has more thickener, making it stiffer and great for all-purpose applications.

Is red grease good for wheel bearings?

The Lucas Oil Red ‘N’ Tacky Grease is actually an all-purpose product, so it isn’t designed specifically for wheel bearings, but this grease has all of the key properties that you want to see in a wheel bearing lubricant. This is a red lithium complex grease that contains additives to reduce rust and oxidation.

Is NLGI 2 good for wheel bearings?

NLGI #2 consistency greases are commonly recommended, but NLGI #1 or #3 grades may also be recommended. The grease shall satisfactorily lubricate wheel bearings over a wide temperature range. The bearing temperatures may range down to -40°F, with frequent excursions to 320°F and occasional excursions to 392°F.

Are all NLGI 2 greases the same?

There are nine different NLGI “grades” including 000, 00, 0, 1, 2, 3, 4, 5 and 6. The correct NLGI grade is an important consideration because not all grease applications are the same. Some grease applications require softer grease so it can be pumped easily through small distribution lines and valves.

What NLGI 3?

GREASE NLGI 3 is a relative rigid grease. GREASE NLGI 3 is for the long-term lubrication of rolling and slide bearings, also appropriate in case of high loads. GREASE NLGI 3 reduces wear thanks to its very good resistance to high pressure. GREASE NLGI 3 is good temperature-resistant.

Is NLGI 2 grease good for wheel bearings?

The grease shall satisfactorily lubricate wheel bearings over a wide temperature range. NLGI #2 consistency greases are commonly recommended, but NLGI #1 or #3 grades may also be recommended. GC – Service typical of wheel bearings operating in passenger cars, trucks, and other vehicles under mild to severe duty.

Can you mix Marine grease with regular grease?

Don’t Mix Grease, but Change If Needed If you can, start with completely clean parts and new grease. Otherwise, greasing more often will flush out the old incompatible grease faster.