What is IPX connector?
IPEX Connector (IPX Connector)has designed several series MHF connectors which provide alternative of Hirose U. FL connector, Hirose W. FL connector, and Murata HSC connector. IPEX female connectors are surface-mounted and soldered directly to the printed circuit board with 50 ohm impedance.
What is the difference between RP-SMA and SMA?
Standard SMA connectors are commonly used on Cellular 3G 4G LTE devices. RPSMA is normally reserved for 802.11 WiFi or WLAN devices. 99% of the time, your device will have the “female” connector, and you’ll need a “male” connector on your cable.
What is a SMA antenna connector?
SMA and RP-SMA are standard threaded antenna connectors for high frequency applications from 1 GHz to approx. 16 Ghz. They are most commonly used in microwave systems, such as portable radio and mobile phone antennas, but also with WiFi antenna systems.
What is RP-SMA used for?
RP-SMA stands for “reverse polarity” (sometimes also referred to as reverse SMA or for short “R-SMA”). It is designed to prevent the unauthorized connection of an external antenna to increase the range.
What is Superbax cable?
Details. The Ultimate Ears IPX Connection System is a durable new cable connection that can withstand the rigors of music touring and minimize the need for service and maintenance. It is sweatproof, tourproof, and delivers the highest quality audio. IP67 certification.
What is FFC FPC connector?
Flexible Flat Cable (FFC) connectors are ribbon like connectors, made of flexible plastic, polymers, films, or engineered rubber and have a metallic connector at the end, which is embedded in parallel to the base. Amphenol offers multi-height vibration-proof flex connectors in 1.00mm and 0.50mm pitch sizes. …
Can you convert RP-SMA to SMA?
$1.95. This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection.
What is RP-SMA female connector?
The RP-SMA(F) connector has the same external housing as a standard or conventional female SMA connector, which consists of an outer shell with the threads on the outside; however, the center receptacle is replaced by a male pin.
What is SMA female connector?
The SMA connector (Sub-Miniature Version A) is a semi-precision RF coaxial connector with a screwing coupling feature. The female connector has a threaded barrel with a density of 36 threads per inch. The male connector has a hex nut that fits securely around the female barrel for a tight coupling.
How does a SMA connector work?
The SMA connector uses a polytetrafluoroethylene (PTFE) dielectric that contacts along the mating plane. Variability in the construction and the mating of the connectors limits the repeatability of the connector impedance.
What is Mmcx cable?
MMCX = Micro Miniature CoaXial connector. The connector on the earphone cable is a male plug with a custom plastic overmold. This connector was developed by Amphenol.