What is cycoloy material?

What is cycoloy material?

Cycoloy* resins are high impact, amorphous thermoplastic alloys which combine the processability of ABS together with the superior mechanical properties, impact and heat resistance of polycarbonate.

What is Cycoloy resin?

CYCOLOY RCM6134 resin is an injection moldable filled PC/ABS blend with non-brominated and non-chlorinated flame retardant.

What is Cycoloy C6600?

CYCOLOY C6600 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable non chlorinated/brominated flame retardant grade with balanced flow, impact and hydrolytic stability. It also offers good chemical resistance and colorability in opaque colors.

What is PC ABS material?

What is PC-ABS? Polycarbonate/acrylonitrile butadiene styrene (PC-ABS) is an engineering thermoplastic created from a blend of PC and ABS. The unique balance of properties is dependent on the ratio of PC to ABS in the blend, the polycarbonate’s molecular weight, and any thermoplastic additives in the blend.

What kind of plastic is cycolac?

CYCOLAC™ Resin – Acrylonitrile-butadiene-styrene (ABS) thermoplastic resin is widely recognized as a tailorable engineering material offering outstanding aesthetics, flow, toughness, dimensional stability, excellent colorability, scratch resistance and high temperature resistance.

Which is better polycarbonate or ABS?

When comparing, ABS VS Polycarbonate, for patterns and colors, polycarbonate always wins. The Acrylonitrile in ABS plastic provides the chemical and hardness factor, the Butadiene plastic enhances impact resistance properties, and the Styrene offers heat resistance and excellent property enhancements.

Which is better ABS or polypropylene?

This type of plastic is both impact and scratch resistant, which makes it stand out the most in the durability category. Polypropylene is the second-most durable of the three types of plastic. ABS comes in as the least durable of all three plastics, although that doesn’t mean that it will break easily.

Is ABS approved for food contact?

ABS is a food-grade plastic safe for use in food processing tools like food processors and refrigerator linings. Excellent resistance to strain and abrasion, maintained impact resistance at low temperatures, and insulating properties make ABS great for food transportation applications as well.

Is ABS approved by FDA?

ABS (Acrylonitrile Butadiene Styrene) is a low-cost engineering plastic that bridges the gap between standard plastics and high-performance engineering thermoplastics. Natural (beige) ABS is FDA-compliant for use in food-processing applications.

What are the disadvantages of ABS plastic?

The disadvantages of Polyacrylonitrile-butadiene-styrene (ABS) include:

• Poor solvent and fatigue resistance.
• Poor UV resistance unless protected.
• Maximum continuous use temperature approx. 70 °C ( 160 °F ).
• Poor bearing properties (high friction and wear).
• High smoke evolution.

How can you tell polycarbonate from ABS?

Both of these plastics are known for impact resistance and durability. However, the extent to which they accomplish these goals varies depending on the situation. The most obvious visual difference between the two is that polycarbonate is naturally transparent, while ABS is opaque.

Which is cheaper PP or ABS?

In general, polypropylene has a lower density than ABS, but it also has a lower melting point. Of the two filaments, ABS is the most affordable and is easier to find. Both thermoplastics suffer from curling and warping issues that can be counteracted with either additives or enclosed chambers.