What is a Monocycle pulse?
Monocycle pulses have been generated using step-recovery diode (SRD) by combining two Gaussian pulses having 180-de- gree out of phase and certain time delay between them . The produced monocycle pulse, however, has pulse duration about twice of that of each individual Gaussian pulse.
What does a pulse generator do?
A pulse generator is either an electronic circuit or a piece of electronic test equipment used to generate rectangular pulses. Pulse generators are used primarily for working with digital circuits, related function generators are used primarily for analog circuits.
What is trigger pulse generator?
The Trigger Pulse Generator Circuit is activated by signals of a variety of shapes and amplitudes, which are converted to trigger pulses of uniform amplitude for the precision sweep operation. The comparator circuit C produces a change in the output whenever the trigger input exceeds the present trigger levels.
What is optical pulse generator?
The OPG (Optical Pulse Generator) converts electrical signals pulses into optical signals with the same temporal shape. The optical signals are carried by a single mode fiber to the fiber adapter on the panel. A fiber collimator can be connected; converting the output beam into a collimated beam.
What is a high voltage pulse generator?
EHT pulse generators are designed to provide precision control over the output waveform to enable process optimization for research and industrial customers. They have been designed to drive plasma loads for medical devices, basic research, and semiconductor processing. …
What is the difference between pulse and frequency?
The pulse repetition frequency (PRF) is the number of pulses of a repeating signal in a specific time unit, normally measured in pulses per second. In radar, a radio signal of a particular carrier frequency is turned on and off; the term “frequency” refers to the carrier, while the PRF refers to the number of switches.
What frequency range should pulse generator 250khz be?
Selecting Option 540 provides 250 kHz to 40 GHz frequency range for the PSG and enables the generation of continuous wave (CW) or analog modulated signals at microwave carrier frequencies. The PSG is a premier signal generator able to produce high fidelity, low noise waveforms for a variety of applications.
How does a high voltage pulse generator work?
The high-voltage supply and the pulse generator use a circuit where capacitors are charged in parallel from a low-voltage source such as a 12-V battery, then discharged in series to gain a voltage multiplication and produce a high-voltage pulse.
What are function generators used for?
A function generator is a piece of electronic test instrument used to generate and deliver standard waveforms, typically sine and square waves, to a device under test. It can be used to test a design or confirm that a piece of electronic equipment is working as intended.