What does F08 mean on a Hotpoint washer?

What does F08 mean on a Hotpoint washer?

If an Indesit or Hotpoint washing machine is flashing an LED 8 times, or is displaying the error code F08, this usually indicates the following. “Heater relay can’t be activated” or “heater relay stuck”.

What does F08 mean on a Hotpoint dryer?

Heater fault Issue
F08 — Heater fault. Issue: During a wash cycle the programme pauses part way through. Advice: We recommend you call our customer service centre to book an engineer on: 0344 822 4224. F09 — Software fault. Issue: Tumble Dryers isn’t operating multiple flashing lights and/or display.

How do I reset my Hotpoint oven?

How to Reset a Hotpoint Stove

  1. Press the “Clear/Off” button several times until the LCD display shows the clock.
  2. Press “Clear/Off” until the LCD display turns off and the oven powers down.
  3. Disconnect the oven’s power supply at the outlet or circuit breaker and wait 60 seconds.

How do I fix Hotpoint F01?

When your washer dryer shows error message F01, we advise you to disconnect and unplug your Hotpoint washer dryer from the mains supply for 3 minutes. After 3 minutes have passed, reconnect your Hotpoint washer dryer and wait 30 seconds before you start up the machine again.

What does F08 error mean?

F08 indicates that the heater is an open circuit so check the heater for continuity with a meter. F12 relates to an element short or the heater has failed completely so replace if necessary. Fault code F09 on some machines is an overflow error, which indicates that water has been found on the base of the appliance.

Why is my Hotpoint dishwasher flashing?

If the water doesn’t reach the proper temperature after a set amount of time, a light on the control panel might start flashing. To determine if the heating element has burned out, use a multimeter to test it for continuity. If the heating element does not have continuity, replace it.

Why does my Hotpoint dryer keep flashing?

Hotpoint tumble dryer all lights flashing When multiple lights are flashing on your tumble dryer and you’re unable to select a programme this indicates a software fault and you’ll need to contact a service engineer.

How do I reset my microwave?

A soft reset is simply turning off the microwave oven to cancel or erase the program you’ve input in the microwave. To do this, you will just simply press on the Off/Clear button. Pressing Off/Clear button and holding it for about 3 seconds will also resolve the Control Locked feature of the microwave.

What does F01 mean?

failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes.

What does F01 mean on Hotpoint oven?

Electronic circuit board fault
F01 — Electronic circuit board fault.

What does F08 mean on Indesit dryer?

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top