What are the S1 and S2 switches on Phantom 3?

What are the S1 and S2 switches on Phantom 3?

The S1 is for switching between the flight modes and S2 is for the RTH and resetting WIFI and relink the AC to the RC. The S1 in the upper position is mainly for PGPS to take off,the middle position for ATTI and the lower position for choosing the flight functions on app.

What does the S1 switch do on Phantom 3?

Use the S1 switch to change the flight mode of the aircraft. The Flight Mode is locked in P Mode by default, regardless of switch position. To switch flight modes, go to Camera view in the DJI GO app, tap and enable “Multiple Flight Modes”.

What is the range on a DJI Phantom 3 standard?

7. What is the range on my Phantom 3 Standard? The signal transmission distance will vary depending on environmental conditions and local regulations, but the Phantom 3 Standard can reach distances of up to 0.5 miles (1 kilometer) away from the pilot.

How do I use the Phantom 4 controller?

Linking the Controller to Your Aircraft

1. Turn on the remote controller, connect it to your mobile device and launch the DJI GO app.
2. Power up the Phantom 4 Battery.
3. Select ‘Camera’, press the remote controller icon, then tap the ‘Linking RC’ button.

Can you fly Phantom 3 without camera?

The Phantom 3 can fly without the camera. I bought one P3S without camera and I fly it a trainer just to practice without risking the expensive camera. DJI GO is useless without camera. You have to always turn on the transmitter first then the Phantom.

How high can a Phantom 3 go?

With Beginner mode disabled, the drone will fly as far away as its remote signal will allow it to go—with the exception of straight up. Unlike with the Phantom 2 in NAZA mode, the Phantom 3 Standard enforces a hard altitude limit, which by default is set to 120 meters (about 400 ft).

What is the latest firmware for DJI Phantom 3 standard?

A new firmware update (V1. 2.0040) is now available for the Phantom 3 Standard.

What are the parts of a DJI Phantom 3 remote controller?

PHANTOM 3 Phantom 3 Standard Remote Controller 1. Power Switch 2. Status LED 3. Battery Level LEDs 4. Lanyard Loop 5. Control Sticks 6. Switch S1 7. Mobile Device Holder 8. Antenna 9. Handle Bar 10. Gimbal Dial 11. Switch S2 12. Micro USB Port 10 3 4 2 1 5 7 9 12 6 8 11 11 10 12 13 14 www.dji.com STANDARD PHANTOM 3

What are the default flight controls in Phantom 3?

PHANTOM 3 Here are the default flight controls ( Mode 2 ). The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left and right movements. The gimbal dial controls the camera’s tilt. 1 2 6 7 8 9 5 4 3 PHANTOM 3 Quick Start Guide V1.0 STANDARD Phantom 3 Standard

What does the Phantom 3 standard have to offer?

Phantom 3 Standard Let’s get to know your Phantom! The Phantom 3 Standard captures up to 2.7K Ultra HD video at 30fps and 12MP photos. The diagram below is an overview of features： Remote Controller The remote controller allows a flying range of 3,280 feet (1000m) in FCC compliant mode and 1,640 feet (500m) in CE compliant mode*.

Does the DJI Go remote controller support Wi-Fi?

The remote controller supports a Wi-Fi connection which, when paired with a compatible mobile device, enables live HD video transmission through the DJI GO app. 1. Gimbal and Camera 2.