Is Wake-on-LAN free?

Is Wake-on-LAN free?

Available for Windows. WakeOnLANx A free utility that can command shutdown, reboot, or startup of any endpoint connected to the network. Runs on Windows. Depicus Wake On Lan GUI A WoL tool for Windows that allows the specification of a target with an IP address or MAC address.

How do I program Wake-on-LAN?

Right-click your adapter and select Properties. Click on the Advanced tab. Select Wake-on-LAN Options and click Properties….

  1. Press F2 during boot to enter the BIOS setup.
  2. Access the power menu.
  3. Set Wake-on-LAN to turn on the power.
  4. Press F10 to save and exit the BIOS setup.

How do I enable LAN on Windows 8?

In the Control Panel, click Network and Internet . Click on Internet Options. In the connections tab, click on LAN settings in the Local Area Network section. Activate the checkbox Use a proxy server for your LAN and click on Advanced.

What port does WOL use?

UDP port 9
Wake-on-LAN uses UDP port 9 by default, to send WOL messages. This port is available for use on most Windows computers. However, if you have installed “Simple TCPIP services”, then Windows may be running the “discard” service.

How do I enable WOL in BIOS?

To enable WOL in BIOS settings,

  1. Switch on the computer and press ESC, F1, F2, F8 or F10 during the initial startup. Depending on the BIOS manufacturer, a menu would appear.
  2. Go to the ‘Power’ tab and enable ‘Wake Up On LAN’.
  3. Save and exit the BIOS setup.

Does WOL work on WIFI?

For most computers, Wake-on-LAN works over Wi-Fi only if the wireless device is the one sending the WoL request. In other words, it works if the laptop, tablet, phone, or other device is waking up a computer, but not the other way around.

How do you send WOL magic packets?

In Windows Open the Device Manager and expand the “Network Adapters” section. Right-click on your network card and go to Properties, then click on the Advanced tab. Scroll down in the list to find “Wake on Magic Packet” and change the Value to “Enabled.” You can leave the other “Wake on” settings alone.

How do I fix my Ethernet connection on Windows 8?

Using the Windows 8 Network and Internet Troubleshooter At the Start screen, type Control Panel to open the Search charm, and then select Control Panel in the Search results. Click View network status and tasks. Click Troubleshoot problems. The Network and Internet Troubleshooter opens.

Why is LAN settings disabled?

Some Registry keys for local or group policy may have been changed due to some circumstances, causing greyed out LAN Settings on the Internet Options. To troubleshoot this issue, follow these: If it occurs on every user on your PC: Press Windows + R to open Run.

Do I need to port forward for WOL?

Wake-On-LAN uses UDP. Many utilities use ports 7 or 9, but you can use any port you like for this. You’ll need to forward a UDP port to all IP addresses behind your router—you can’t just forward to a specific IP address.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top