Is maple wood dense?

Maple, oak and cherry are among the most dense of the domestic hardwoods, but with exotic hardwoods in the equation, each of these drops a few points.

How do I know if my wood is Soft Maple?

Hard Maple usually has a lighter, more uniformed color. While Soft Maple is typically darker, sometimes carrying hues of brown, red, or even grey. Look at the leaves. If the tree is still standing and yet to be harvested, take a look at its leaves.

Is maple a soft or hardwood?

Maple trees are one of the most common species of hardwoods in North American forests. There are an abundance of variations of the Maple but they are commonly placed into two categories – Hard Maple and Soft Maple. Typically, Hard Maple is most often known as Sugar Maple.

What is the specific gravity of maple wood?

0.72
Specific Gravity

Spc. Gravity	Specie Name
0.71	Birch Burl
0.72	Birdseye Maple
0.72	Hard Maple
0.72	Curly Hard Maple

How hard is soft maple?

Despite being called soft maple, both hard and soft maple are considered hard woods. Soft maple holds the same hardness rating as cherry at 950 on the Janka Hardness Rating Scale, making it harder than African mahogany at 830, alder at 590 and poplar at 540.

What is the density of maple?

Density of Wood

Type of wood: Hard	kg/m3	g/cm3
Walnut	641-689	0.64-0.69
Mahogany	497-849	0.50-0.85
Maple	625-753	0.63-0.75
Oak	593-897	0.59-0.90

Is soft maple good for firewood?

These are also considered by many to be the best maple firewood because like other dense hardwoods, they burn long and hot. These maples don’t have as many BTU’s as hard maples but they still make good firewood. One advantage of soft maple firewood is it sometimes splits easier and dries faster.

What is the density of soft maple?

HOW DOES IT COMPARE

Lumber (12 % moisture content)	Specific Gravity (Density)	Hardness (lbs)
Hickory	.66	1,820
Maple, hard	.63	1,450
Maple, PC	.48	850
Maple, soft	.47	700

How soft is soft maple?

Soft maple holds the same hardness rating as cherry at 950 on the Janka Hardness Rating Scale, making it harder than African mahogany at 830, alder at 590 and poplar at 540.

What is soft maple wood?

Soft maple is a commercial term meant to differentiate the wood of some types of maple from hard maple (Acer saccharum). Distribution: Temperate regions of North America. Average Dried Weight: 30.2 to 38.0 lbs/ft3 (485 to 610 kg/m3) depending on species. Janka Hardness: 700 to 950 lbf (4,230 N) depending on species.

What is the Janka hardness of soft maple?

950
In terms of hardness, Hard Maple hardwood has a Janka hardness score of 1450, while Soft Maple has a hardness score of 950.

What is soft maple good for?

Soft maple is used for furniture, kitchen cabinets, doors, musical instruments, turnings and millwork. It is lower-priced than Hard Maple and sometimes used as a substitute. Both Soft Maple and Hard Maple can be purchased in special white color pulls.

Is Maple hard or soft wood?

Even though it is referred to as soft maple, it is only soft in relation to hard maple. A common measurement of wood hardness is the janka hardness test. The test measures the amount of force required to embed a .444″ diameter steel ball halfway into the wood.

How much does soft maple weigh?

Soft maple is a commercial term meant to differentiate the wood of some types of maple from hard maple (Acer saccharum). Average Dried Weight: 30.2 to 38.0 lbs/ft 3 (485 to 610 kg/m 3) depending on species

How do you identify hard maple wood?

(You can find ferrous sulfate at many lawn and garden stores.) Wipe the solution onto a piece of the unknown lumber and wait a minute for the wood to change color. Soft maple will turn a translucent blue-black color. On hard maple, the surface turns greenish gray.

What is soft maple used for in furniture?