How wide is a 1967 Mustang rear end?
How To Spot, Build, And Swap In the Ford 8.8 Mustang Rearend.
| Vehicle Application | Axle Width (inches) |
|---|---|
| ’65-’66 Mustang | 57 11/44 |
| ’67-’70 Mustang 8.0 | 59 51/48 |
| ’71-’73 Mustang | 61 11/44 |
| ’67-’71 Comet, Cougar | 59 11/44 |
How wide is a Ford 8 inch rear end?
The Ford 8-inch housing has a center casing roughly 11 inches wide. Most flange-to-flange assemblies are between 56 and 62 inches wide; you can check the axle length chart we have available at www.hemmings.com/parts-locator for specific measurements for your body style.
What is the width for a 1967 Mustang?
Dimensions
| Doors : | 2 |
| Exterior | |
|---|---|
| Length : | 183.6 in | 4663 mm. |
| Width : | 71.3 in | 1811 mm. |
| Wheelbase : | 108.0 in | 2743 mm. |
How wide is a Ford 8.8 differential?
7] From the factory, 8.8s use 1330- or 1310-series U-joints. This is the companion flange where the yoke bolts. The 1330 has a 3316-inch width for the U-joint, and the 1310 has a 358-inch width. The 1330 is usually found in Ford trucks.
How much horsepower will a Ford 8 inch handle?
Registered. 400hp is about all the 8″ will take with a street rebuild.
What rear end is in a 67 Mustang?
1967 Ford Mustang Axle Information & Ratios
| Axle code | Ratio & type |
|---|---|
| F | 2.80 locking differential |
| 2 | 2.83 open differential |
| B | 2.83 locking differential |
| 1 | 3.00 open differential |
How do you measure a rear end width?
How to Measure Rear End Width
- Locate the axle flanges on either side of the rear axle. The flange is the platform on which the wheels are mounted and bolted to the axle.
- Using a measuring tape, measure from one flange to the other.