How much does a fiber laser cost?

How much does a fiber laser cost?

Fiber lasers usually cost in the range of $20,000 to $45,000. Don’t get too caught up in the high priced fiber laser machines.

How much power does a fiber laser use?

A great rule of thumb is that if you never cut material over 0.100 inch, then highest power you should consider is 10kW. However, if some of the material you cut is over 0.100 inch, then you can effectively utilize 15kW. If some is over 0.130 inch, you can effectively utilize 20kW.

How long do fiber lasers last?

In fact, the diode module in a fiber laser typically last three times longer than other technologies. Most lasers have a life of around 30,000 hours, which typically equates to about 15 years’ use. Fiber lasers have an expected life of around 100,000 hours, which means about 45 years’ use.

How thick can a fiber laser cut?

In the past, the thickness of fiber laser cutting plates is limited to 12mm of stainless steel and 20mm of carbon steel. High power laser cutting equipment has brought revolutionary changes to the field of processing and its efficiency has greatly improved the processing speed.

What is the difference between CO2 laser and fiber laser?

The main difference that determines the type of materials each laser can process is the wavelength. A fiber laser usually has a wavelength of 1,060 nm while CO2 lasers have wavelengths in the 10,600 nm range. In general, fiber lasers have many advantages over CO2 lasers.

How much does a laser tube cost?

Sheet Metal and Tubes. Historically, tube laser cutting has been very expensive. Shops with a tube laser cutting machine might charge $500 setup fees, and the machines themselves would sell for $500,000 and up.

What can fiber laser do?

Fiber lasers are everywhere in the modern world. Due to the different wavelengths they can generate, they are widely used in industrial environments to perform cutting, marking, welding, cleaning, texturing, drilling and a lot more. They are also used in other fields such as telecommunication and medicine.

How much electricity does a laser use?

An average effective working time of 2 hours a day. Of which 50% of the time with maximum laser power (80 watts) and 50% of the time with half laser power (40 watts)

Which is better CO2 laser or fiber laser?

Fiber can cut copper, brass and aluminum much better and more safely than CO2 because the beam is more readily absorbed and not reflected. Fiber laser operating costs are typically half of what a CO2 system can offer due to the lower electrical consumption and high electrical efficiency of Fiber lasers.

What are three types of lasers?

Types of lasers

  • Solid-state laser.
  • Gas laser.
  • Liquid laser.
  • Semiconductor laser.

How thick can a 150 watt laser cut?

Excellent for small-batch manufacturing (18″ x 32″ cut area), the Universal 150W is simple to use and can cut or engrave the following materials: wood (up to 1/2″ thick) metal (marking only) acrylic (up to 1/2″ thick)

What can I cut with a fiber laser?

The laser can cut or etch. The materials that the laser can cut materials like wood, paper, cork, and some kinds of plastics. Etching can be done on almost anything, wood, cardboard, aluminum, stainless steel, plastic, marble, stone, tile, and glass.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top