How many watts is a Fender Deluxe 112?

How many watts is a Fender Deluxe 112?

Product Specs

Brand Fender
Model Deluxe 112 2-Channel 65-Watt 1×12″ Solid State Guitar Combo
Finish Black
Year 1993 – 1994
Categories Guitar Combo Amps

How do I identify my Fender amp?

All Fender amplifiers manufactured from 1990 to the present include a date code, printed on the quality assurance (QA) sticker on the back of the amp chassis. This black-and-silver sticker contains several lines for “sign-offs” on completion of sound and electrical testing.

How many watts is a Fender Deluxe?

Specifications. The Deluxe Reverb is a 22-watt tube amplifier (at 8 ohms), powered by a pair (“duet”) of 7408/6V6GT power tubes, one GZ34/5AR4 rectifier tube, four 7025/12AX7 tubes for preamplification and tremolo oscillation, and two 6201/12AT7 tubes driving the reverb and phase inverter circuits.

Is a Fender Deluxe a tube amp?

Specifications. The Hot Rod Deluxe is an all tube combo amp rated at 40 watts. It utilizes a single 12-inch Celestion A-Type Speaker.

What year is my Deluxe Reverb?

The last two digits is the week of that year. At 4 digits, the first two digits are the year of the 20th century. Example: 606 6849 is 1968 week 49….Production period Fender models.

Model Introduction Discontinued
Deluxe 1948 1966
Deluxe Reverb 1964 1979
Deluxe Reverb II 1982 1986
Harvard 1955 1963

How do you date a deluxe reverb?

All Fender amplifiers manufactured from 1990 – present include a date code printed on the quality assurance (QA) sticker on the back of the amp chassis, and are dated the by the first letter as the year and the second letter as the month.

Who uses Fender Deluxe amps?

It has appeared on thousands of albums over the years and has been played by, not only blues guitarists but rock, country, and funk players of all kinds. The Beatles used it on many albums in the late 60’s. Fender claims the Deluxe Reverb is the most recorded amp in history.

How heavy is a Fender Deluxe Reverb?

42 lbs.
Weight: 42 lbs.

How do I check spring reverb?

Check the resistance of the reverb tank’s output using an ohmmeter. To do this, put your ohmmeter leads across the tip and shield of the reverb tank’s return cable (the shielded cable). For most MESA amps with tube reverb circuits, the reading at the shielded cable’s jack will be approximately 200Ω.

What does spring reverb sound like?

Spring reverb is most often described as “bouncy.” It’s easy enough to imagine that a vibrating coil would certainly have this texture. Remember those tightly coiled doorstops you would flick as a kid? The concept is similar! The bounciness we hear comes from the actual timing between echoes in the tank.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top