How high should outlets be above vanity?

How high should outlets be above vanity?

There are no set rules for the height of receptacles on walls or over counters, even in a bathroom. Good practice is to keep them at least 4 inches above a counter top or backsplash and not directly over a sink or under a window.

How far above a sink should an outlet be?

The only thing the NEC requires is that there must be one outlet within 36 inches of the outside edge of the sink, and it must be in the wall adjacent to the basin or countertop. It’s permissible to put a receptacle higher than that, as long as there is another one within the required distance.

Where should Vanity outlets be placed?

Receptacles are best positioned a foot or so to the left or right of sink basins. Depending on the size and depth of your bathroom, you may want to add a general outlet near the door to plug in a vacuum cleaner. If you happen to have a makeup table incorporated in the bathroom plan, that’s a great place for an outlet.

Can you have an outlet in a vanity?

Re: Outlets inside vanity cabinet As long as it’s not subject to damage (ie, tucked away like you have it) it’s fine.

How high should a GFCI be in a bathroom?

A GFCI outlet, to remain accessible, should sit within about 15 to 48 inches from the floor. If the outlet is located over an obstruction such as a cabinet, the outlet should sit lower to keep it accessible to someone who is disabled or of shorter stature.

What is the recommended level of height the socket outlet should be permitted in bathrooms?

It is recommended that 3-pin, 15 A socket-outlets may be provided near the shelves, bookcases, clock position, etc. No socket-outlet shall be provided in the bathroom at a height less than 130cm.

How close to a bathroom sink can an outlet be?

Every bathroom must have at least one electrical outlet. It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.

Where do the bidet outlets go?

Since the electrical cords on bidet seats are about 4 feet long, it’s recommended that new outlets be installed on the wall behind the toilet. Most of the electrical cords extend out from the right hand side of the bidet when facing the toilet, so plan accordingly.

Why do bathrooms only have one outlet?

The National Electric Code states that, at a minimum, a bathroom needs one GFCI-protected outlet. If you’re using a single GFCI outlet for protection, it must be wired for “multiple location” protection; this way, it will protect all the downstream outlets on the same circuit.

How high should a GFCI be from a sink?

It must be a GFCI, and it must be within 3 feet of the edge of the sink. Either behind or beside the sink is acceptable — across from the sink on an opposite wall is not. If the bathroom has two sinks, each must have an electrical receptacle within 3 feet.

How far should an outlet be from a toilet?

This often requires a electrical outlets within 4 feet of the toilet.

Why are there no plugs in bathrooms?

The reason that there are no plus sockets in bathrooms is simple – having an exposed plug socket can increase the risk of electric shock. Plugs in England generally use 240-volt power, twice the amount found in US plugs which have 120-volts.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top